![]() |
surefire ways to break you robot
These are 5 ways that your robot will break during a compition. These action can only be done by a member of the pit crew who has extensive knowlegde of every system, and how to fix everyone.
Put all the tools, parts, and electric tape away. Walk to the snack bar and spend more then $5, you will be intercepted on your way back to pits by 2 or more team members looking for you. After fix is done, your food will be missing. Fall asleep. Connect to a wireless network, not to do research for robotics but to have fun. Try to watch more then 4 matches in row. Got anymore, this always broke the robot for me :) |
Re: surefire ways to break you robot
Quote:
|
Re: surefire ways to break you robot
Just say this:
"Hey, the code's done! Let's test it!" [My apologies to all you software wizards that are given almost all of Thursday afternoon to get hybrid-mode "done".];) |
Re: surefire ways to break your robot
Presence of parents, school administrators, or prospective sponsors.
Videotape a match. Look across the field to see 1024, 111, and 1114 on the other alliance. Your robot may not break, but your drivers will. |
Re: surefire ways to break your robot
Quote:
What if the people that were facing them were 217, 469, 148? Set ur autonomous mode to try to hurdle itself over the bar? |
Re: surefire ways to break you robot
Clothesline the overpass at high speed.
Make metal shavings over the electronics and forgetting to clean them out. |
Re: surefire ways to break you robot
Sprinkle cheddar cheese liberally over your controller board, bake at 350 degrees for 20 minutes. :yikes:
|
Re: surefire ways to break you robot
Best surefire ways to break our '08 bot:
Try to actually engineer pieces of the bot like motors to handle a pre-conceived load without burning out Claim we actually have an idea of what we're doing Claim that even though it's the first time we've ever done most of the things we're doing on the bot, they will all work together ok |
Re: surefire ways to break you robot
advance to the semi-finals
|
Re: surefire ways to break your robot
Step 1: Retrieve our various PVC pipes strewn about the field on Thursday at Chesapeake.
Step 2: Instruct a student to take the drill and screw together the fittings and pipes. Step 3: Queue up for our next practice round. (With the relative youth of our team, the kids missed a spot or three each go-round until that night, where there were about five screws in every joint.) |
Re: surefire ways to break your robot
With 5 seconds left, pull off something that takes 9 seconds to do.
|
Re: surefire ways to break you robot
tell the drivers " hey lets try something different this round"
|
Re: surefire ways to break you robot
why not just touch your ground battery lead to your hot battery lead? that always makes sparks. Sparks=break
|
Re: surefire ways to break you robot
well for all of 1902s bots all you have to do is let scott or chuck(two of our old drivers) drive it and...well this happens.
http://www.chiefdelphi.com/forums/sh...xploding+wheel |
Re: surefire ways to break you robot
bottom out your suspension going full speed down the track and run into one of the "feet" supporting the lane divider.
I successfully did this and completely destroyed one of our suspension assemblies. |
| All times are GMT -5. The time now is 21:44. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi