Most creative use of a part or material in 2008
 

One of my favorite parts of FIRST every year is walking through the pits and seeing the ideas people have come up with. Literally every design that our team has on the white board after kickoff will be seen at some point or another, no matter how crazy, complicated, or impossible we thought they were!

And then you see something that you never, ever thought of.

I just wanted to hear some stories about outside-the-box thinking when it comes to material and parts utilization. I can only go to so many competitions each year, so I want to know what other crazy stuff is out there!

I'll start with a robot that knocked my socks off:

1218 - Chestnut Hill Academy :eek:

At Chesapeake I looked at their robot and was floored. Their frame was made out of the coolest, lightest, and cheapest material I have ever seen - broken NHL hockey sticks! One of their kids worked at the Philadelphia Flyers practice facility and was able to get his hands on some broken composite sticks. The strength-to-weight ratio of a stick is unreal, and a broken hockey stick has virtually zero value.

On top of that, their launcher consisted of an aluminum step ladder (reinforced in places) used as a catapult. Yet another light, sturdy enough, and creative use of a part.

So, what have YOU seen?

Re: Most creative use of a part or material in 2008
 

Team 846's Rubbermaid suction cup.

Re: Most creative use of a part or material in 2008
 

At West Michigan, team 2337 used a seven-pound hammer filled with small pieces of metal to "kick" the ball over the overpass. It worked well, especially combined with a fast drive and an effective pickup.

Re: Most creative use of a part or material in 2008
 

team 2174's use of trash can lids to corral the ball around the track.

Re: Most creative use of a part or material in 2008
 

I'm sure that I'm not alone in being amazed at Team 272's use of an electromagnet to tension the slingshot on their robot.

I only saw their robot with a trackball loaded at the end of a match once... facing the crowd the electromagnetic ceased to have electricity as it is wont to do at the end of a match, and the trackball was unleashed to bounce on the only judge sitting along judge's row. :eek:

Re: Most creative use of a part or material in 2008
 

We entertained the idea of using a kitchen wok to grab the ball with. We never prototyped it though.

Re: Most creative use of a part or material in 2008
 

Team 1388's prosthetic leg. :D They didn't actually use it in competition, but their robot was still plenty cool.

Re: Most creative use of a part or material in 2008
 

45 TechnoKats use of quite possibly the most unbelieveably cool slip-ring i've ever seen... no no, brushes weren't good enough... they went for liquid mercury... :yikes:

Not to mention that part figures into the most mezmerizing robot manipulators i've yet seen....... the gripper go round. *twilight zone crescendo*:ahh:

-q

Re: Most creative use of a part or material in 2008
 

for the past to year we've use hockey sticks we try to use broker ones from the high school team but they were too short but even new ones were only 20$

Re: Most creative use of a part or material in 2008
 

[quote=Abwehr;732066]At Chesapeake I looked at their robot and was floored. Their frame was made out of the coolest, lightest, and cheapest material I have ever seen - broken NHL hockey sticks! One of their kids worked at the Philadelphia Flyers practice facility and was able to get his hands on some broken composite sticks. The strength-to-weight ratio of a stick is unreal, and a broken hockey stick has virtually zero value.
QUOTE]

Know what's crazy? We prototyped a robot design using skis- yes, SKIS. We thought we'd be the only snow-worthy robot at the Connecticut Regional. We didn't end up using them... insted we built our gripper from driveway reflectors used for snow. I guess we were stuck in the New England winter theme with our robot.

I'm not sure I can think of any crazy parts or materials at our regional this year. I know there must have been some, but I can't think of any right now.

Re: Most creative use of a part or material in 2008
 

<nitpick>

It seems to me that this would be a violation of <R60>:

EDIT: Well, it might not be an 'electric solenoid actuator', thereby not violating the letter of the rules, but it works on the same principles (electromagnetism) and thusly, it certainly violates the spirit of the rules.

</nitpick>

Re: Most creative use of a part or material in 2008
 

They asked the question in the Q&A during build and the GDC allowed it. 284 also used an electromagnet to release their shooter.

Re: Most creative use of a part or material in 2008
 

Team Chimera used a trash can and they stuck oscar the grouch inside of it. They used it to knock balls off...it's really cool and effective.

Re: Most creative use of a part or material in 2008
 

I can see this as a divergence from the topic of this thread so I'm guessing it should be moved if it turns into a big debate... but isn't the Q&A contradicting itself here?

A solenoid is nothing more than an electromagnet with a slug in it to pull/push a load. What's the difference that doesn't make this "violate any other parts use rules"?

Wow... if I would have known this existed I could have at least built the prototype linear mass driver that I wanted to throw the ball with... :(

-q

Re: Most creative use of a part or material in 2008
 

The difference I see is that 272's electromagnet didn't actively move anything. It just held an object in place (and released it on command).