Re: pic: 1726 NURC robot prototype
 

How did you run both the video and the info for the VEX robot controller on the same tether?

Re: pic: 1726 NURC robot prototype
 

Yes we are; we're using the twisted pairs of CAT-6 cable to prevent any interference, although we recently bought some more flexible cable for the miniROV with untwisted solid wires, and the signals work just fine on that tether.

Re: pic: 1726 NURC robot prototype
 

The signal from the video camera goes up the tether on one twisted pair, while the signal from the vex transmitter goes down the tether on a different twisted pair. Network cable (cat5, cat6) has 4 pairs, phone cable usually has 2 or 3 pairs.

Re: pic: 1726 NURC robot prototype
 

Ok cool. Are you using a webcame or one of those circuit board cameras(not sure what the name is).

Re: pic: 1726 NURC robot prototype
 

We're using some board cameras from SuperCircuits. although of the 3 we bought, the last one didn't work, so we need to get some more.