Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)
-   -   BEI Gyro (http://www.chiefdelphi.com/forums/showthread.php?t=68079)

John Gutmann 15-06-2008 20:25

BEI Gyro
 
I was wondering where I could find a datasheet for one of the old BEI gyros.

Thanks,
-John

Manoel 16-06-2008 01:16

Re: BEI Gyro
 
1 Attachment(s)
John,

Here it is, straight from the 2001 FIRST Robotics Competition Manual, section The Robot, Appendix H. ;)

The 2003 gyro was different externally (different connector, round corners) but I'm not sure if it had the same electronics as the 2001-2002 model. The 2003 manual had no spec sheet for the gyro - it came as a piece of paper inside the box. I'll check at the school tomorrow if we still have that box intact, I know the gyro is. :ahh:

SpaceOsc 16-06-2008 01:43

Re: BEI Gyro
 
Should be here

http://www.chiefdelphi.com/media/papers/1736

John Gutmann 18-06-2008 17:36

Re: BEI Gyro
 
Quote:

Originally Posted by SpaceOsc (Post 752859)

I am guessing the one I wan tis on page one (AQRS-00075-109) because my pins are within the 90 degree bend. That is if you have any clue what I mean.

-John Gutmann


All times are GMT -5. The time now is 10:56.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi