Chief Delphi
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: 2009 Speed Controller by Luminary Micro (http://www.chiefdelphi.com/forums/showthread.php?t=68717)

Greg Needel 05-08-2008 13:50
pic: 2009 Speed Controller by Luminary Micro
 

Elgin Clock 05-08-2008 13:50
Re: pic: 2009 Speed Controller by Luminary Micro
 
Sexy kinda! :cool:

Kyle Love 05-08-2008 13:51
Re: pic: 2009 Speed Controller by Luminary Micro
 
I was skeptical on how big the new ones would be. Nice to see they are about the same size as the Victors.

Tom I 05-08-2008 13:52
Re: pic: 2009 Speed Controller by Luminary Micro
 
So is this the replacement for the VIC's? looks pretty sweet!

JesseK 05-08-2008 13:56
Re: pic: 2009 Speed Controller by Luminary Micro
 
How'd you find out about this Greg? There doesn't seem to be anything on the FIRST or NI websites about it.

Joe Ross 05-08-2008 14:05
Re: pic: 2009 Speed Controller by Luminary Micro
 
Quote:
Originally Posted by JesseK (Post 760252)
How'd you find out about this Greg? There doesn't seem to be anything on the FIRST or NI websites about it.
See the thread in the electrical section, there was a press release.

http://www.chiefdelphi.com/forums/sh...threadid=68714

Greg Needel 05-08-2008 14:07
Re: pic: 2009 Speed Controller by Luminary Micro
 
Quote:
Originally Posted by Joe Ross (Post 760253)
See the thread in the electrical section, there was a press release.

http://www.chiefdelphi.com/forums/sh...threadid=68714


yup I saw that then did a little googling to find it and then took this as a screen capture out of the spec sheet. I figure teams would want to see it and the thread about it was bound to get buried after a short time.

billbo911 05-08-2008 14:08
Re: pic: 2009 Speed Controller by Luminary Micro
 
I like this quote from the document!!!

Quote:
Additional Features for Future Competitions
�� CAN Communication
– New speed control option via Controller Area Network (CAN) protocol version 2.0 A/B interface
– Multicast shared serial bus for connecting systems in electromagnetically noisy environments
– 1M bits/s bit rate
– Real-time monitoring of current, voltage, speed, and other parameters
�� Quadrature encoder input with 5 V supply output to encoder and index input
�� Analog 10-k٠potentiometer input

Dowjonesbotics 05-08-2008 16:24
Re: pic: 2009 Speed Controller by Luminary Micro
 
That looks awesome

ducttapedude 05-08-2008 16:38
Re: pic: 2009 Speed Controller by Luminary Micro
 
no fan makes me worry

Joe G. 05-08-2008 16:41
Re: pic: 2009 Speed Controller by Luminary Micro
 
Quote:
Originally Posted by ducttapedude (Post 760322)
no fan makes me worry
Or even any obvious ventilation, for that matter

Joe Ross 05-08-2008 16:49
Re: pic: 2009 Speed Controller by Luminary Micro
 
Quote:
Originally Posted by ducttapedude (Post 760322)
no fan makes me worry
From the PDF spec sheet:

Quote:
the enclosure better shields the cooling fan and electronics from debris

Akash Rastogi 05-08-2008 17:47
Re: pic: 2009 Speed Controller by Luminary Micro
 
smexy. :cool:

ducttapedude 05-08-2008 20:48
Re: pic: 2009 Speed Controller by Luminary Micro
 
Quote:
Originally Posted by Joe Ross (Post 760327)
From the PDF spec sheet:
woohoo

Jeff K. 05-08-2008 21:09
Re: pic: 2009 Speed Controller by Luminary Micro
 
Looks good. Although from the current view, it looks like the rear of a semitruck with a wide body kit.
Should flow well with the new electronics and looks to be a tad bit shorter.


All times are GMT -5. The time now is 12:42.
Page 1 of 2 1 2 >
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi