New Control System How To
 

I think it is time we start discussing some of the specs on the new control system. Since Beta teams are starting critical wiring by now and the wire strip specifications have changed from last year. According to the manufacturer, WACO, the teminal blocks on the Power Distro need to be stripped 13-14 mm or 1/2" to fully insert in the blocks. Do not tin the wire before insertion. The terminal needs the wire to form to the inside of the block for max current and lowest series resistance.
I will post links to the manufacturer's website soon. (after I get some work done for my paying job) Beta teams are asked to post here or ask questions of interest to all.

Re: New Control System How To
 

Is there a gauge of wire that is recommended or do we have the choice between 10 and 12 gauge?

Thank you Beta testers.

Re: New Control System How To
 

Near as I can judge off the pictures, the 20/30 amp slots should accept up to AWG 10, and the 40 amp slots should accept up to AWG 6. Beta teams are welcome to correct me, and note that that's just physical capacity. Rules on what sizes are legal are up to FIRST, as always.

Re: New Control System How To
 

Hi Al.

I'm a beta team tester, and long-time Chief Delphi lover, so don't take this post the wrong way.

As part of my team's responsibility to FIRST, (for letting us have the pleasure of debugging the new system), we're obligated to monitor and post information on the public Beta Test forum they've setup for centralizing information about the new system.

http://forums.usfirst.org/forumdisplay.php?f=743

This is an UNMODERATED forum, so there is no pre-vetting of informtion, and it's instant.. It's also open for anyone who registers.

This is also not an "exclusive" deal where we can't post elsewhere (quite the contrary). It just means that "in theory" this should be the best place to get factual information from teams and developers using the new controller.

Since we are in such a strong "learning mode" it's difficult for me to monitor multiple forums. I want to respond to as many questions as possible, and luckilly there don't seem to be so many right now ???. But any day now it's going to be insane.. I just know it.

So, politics aside, if you want to capture the attention of beta testers, you should definately (also?) post "new control system' questions to the FIRST forum...

Phil.

Re: New Control System How To
 

According to the Power Distribution (PD) manual:

The "Main" breakers use WAGO 745-85X connecors, and the lower capacity breakers use WAGO 745-83X connectors

I assume the specs are online somewhere for these....

See my post about the FIRST Beta forum... ;)

Re: New Control System How To
 

Looks like I was dead on. Specs, such as can be had from WAGO:
745-831 (30A terminal blocks)
745-851 (40A terminal blocks)

Re: New Control System How To
 

FIRST is working on a document specifically on how to use the WAGO connectors. I posted Al's suggestion about specifying the wire strip length, so it can get incorporated.

I also created a post on the FIRST forums that links back to this thread, so everything is "legal". http://forums.usfirst.org/showthread...7600#post17600

Re: New Control System How To
 

Thanks for putting up this forum link. This will help a lot. Our team is having troubles getting started so I will be checking this out for info on the controll system. Thanks

Re: New Control System How To
 

I feel like in many ways, the amount and format of information regarding the new controls system would be best captured in a Wiki, not a bunch of individual forum threads.

FIRSTWiki didn't seem to catch on the first time around, but maybe we can revive it with information about the new controls system? A page about each of the components, edited by people who know about them, would quickly result in a fairly comprehensive "how to" manual.

Re: New Control System How To
 

One of our mentors got a job at Wago as the sales rep. for the midwest. :) I think he is working on getting discounts for teams in the midwest or something like that. I love their cage clamp technology!!

You will never have a loose wire again. The plastic with crack before the wire slips. I have abused these connectors in any way I can think of, the wire does not pull out if inserted properly.

Check out their Levernuts if you get a chance. They are like wirenuts but a lot easier to use(for me anyways) and more secure.

-Vivek

Re: New Control System How To
 

I am new to FIRST so I may be misinterpreting the rules. :confused: But if your mentor gets the Midwest teams a discount on parts then those may become illegal if used on next year's robots.

I am sure someone more experienced will correct me if I am wrong. Also please don't take this personally as I am trying to learn how to interpret FIRST rules. I am basing my opinion on the 2008 Financial rules, I don't think 2009 rules will be much changed.

Just taking your statement at face value. Say the midwest teams are given a midwest only discount on Wago parts. If these parts are only used for pre-season training and not put on the 2009 robot not a problem.
But use them on the 2009 robot and they become illegal as other teams outside the Midwest can't buy these COTS at the same price. From reading of the rules if a COTS part can not be brought by all teams for the same price then it can't be used? :confused:

Am I reading the rules correctly?

Re: New Control System How To
 

Depending on where you are located in the US, there are different contacts for Wago that you call call. As always, our website has most of the information you will need, but can be a bit difficult to navigate at times.
If you need anything and you are located in the Dakotas, MN, MO, KS, IA, NE, or AR you can e-mail me and I will get back to you. Sometimes it may take a day or two, but I'll try to be quick.

Re: New Control System How To
 

Almost there. It is my understanding of the accounting rules, that any team can get anything allowed on your robot (material, component, etc..) for any price they can manage to get their hands on it for. (Free works best btw..lol)
But, for Bill Of Material purposes, all teams must account for COTS prices.(Re: Non-discounted prices).

For example, say I got a local metal distributor to give me 50% off for every metal piece my robot requires. (material).
I can jump for joy because I just saved my team 50% of the price & could potentially buy twice as much now with the money I had, but for legal competition documentation intents & purposes, I can not use more than the allowed cost of the robot in metal, or combined for everything used on the robot, & have to accurately account for the COTS price (Price of all that metal without a discount) in my BOM.

Bottom line is, that just because I can buy a bunch of metal for 50% off & you buy it at full price, I still have to account in my BOM the exact same price you do if we built the same exact robot with the same amount of metal. I can't build a robot twice the cost amount of you just because I got everything for 50% off.

Re: New Control System How To
 

Close... Elgin has explained the cost accounting rule, above, but what you may be looking at regarding disallowing parts in "future years" has to do with the availability of the part... not the price of the part.

For instance under existing rules the gearbox from the 2006 and 2007 kit of parts (manufactured by IFI, if I recall) is no longer allowed to be used because it is no longer a COTS part.... you can't buy one at any price. That is why AndyMark keeps some of their older transmissions available for sale. You do, of course, have to price the part at the current COTS price.

Also if you modify or improve a COTS part in a given year, then it is no longer "COTS" and cannot be re-used in future years.

So long as the part were to remain available on a COTS basis, it could be re-used for many years... regardless of whether it was purchased at full-price, a discounted price or donated. But as soon as that specific part was no longer available on a COTS basis, then it would be disallowed.

Jason

Re: New Control System How To
 

Taking links to existing published FRC control system content (not just content on the Forums) and organizing them via a quickly editable website into categorized pages and (eventually) useful "how-to's" is exactly what I've been working on and maintaining since before the beta test teams were announced. Feel free to check out the following:

http://controlsystem.neofra.com/

Not exactly a Wiki, but it does the trick for me. FYI, this is built using Google Sites. I'm a web/HTML idiot yet managed to put together something that I feel is at least *somewhat* useful for team needs.

Re: New Control System How To
 

Travis you have done a great job. :)

This will make life so much easier trying to keep track of everything.

Thanks again for taking the time to do this.
Brent

Re: New Control System How To
 

What Elgin said. You must still put the parts in the Bill of Materials at full price but can receive a discount or even have the parts donated.

-Vivek

Re: New Control System How To
 

Phil et al,
My attempt here is to get as much information to as many students and mentors as possible. Regardless of your favorite posting environment or the First websites, CD has more than 20,000 members. I just want to be sure that the maximum amount of information gets out there. If need be, try to post accurate facts in multiple locations. All will benefit.
Since it appears from the available documents, that the breaker size will remain the same as in the past, I will go out on a limb and predict that wire rules will remain relatively unchanged. Remember that minimum wire size is limited by the breaker feeding it. Breakers are chosen to protect the wiring, not the load. Thanks to Kevin for posting the links to the terminals.

Re: New Control System How To
 

This is a link to the general brochure on WACO terminals...http://www.wago.us/downloads/51017243.pdf

This is a link to their e-learning on the "cage clamp" terminals...https://admin.na3.acrobat.com/p35541967/
It is a powerpoint style tutorial in PDF format and has some interesting info on current, testing, temperature, etc.

Re: New Control System How To
 

The real test on the control system will be when we start putting high current through these WAGO connectors. I have seen more failures with these things than not under high current. The little metal tab which contacts the wire (typically about 1/4 the wire size) has a tendancy to heat up and cool down losing its spring ability and thus losing contact. Expecially with constant movement and shock.

At our new Menards in Holland I have personally replaced about 40 of their wirenut versions which use the exact same concept, 6 of which had such a catastrophic failure that the fire department was called.

-MIke

Re: New Control System How To
 

This brochure is probably a little more enlightening on the WAGO Cage Clamp system. Particularly page 2, which shows how the installation process works.

Mike,

What kind of currents are we talking about here? As I understand the system, all/most of the current should be flowing through the copper current bar. The spring steel clip shouldn't see much current, given the relative sizes and resistivities of the clip and current bar. So I don't really see a mechanism for the extreme kind of heating needed to take the set out of the spring steel, save a rather poor installation.

Re: New Control System How To
 

Kevin,
That is a good find, thanks.

Re: New Control System How To
 

That was the installation where aluminum wiring was quietly substituted for the copper that got stolen the night before the work was done, right? I remember reading something about that this summer in an electricians' newsletter. The connectors involved (I think they were called something like "WAGO Wall Wire") were explicitly not intended for use with aluminum.

Re: New Control System How To
 

WAGO Wall-Nuts then. And yeah, it does say Cu/Cu only. Aluminum in copper fittings is definitely a bad idea.

Re: New Control System How To
 

The spring tab that contacts the wire isn't where most of the current flow happens - instead it is the large flat (and thick!) surface that it is pressing the wire against. I will suggest that (for these connectors) the temperature rise in the wire will exceed that of the connector.

Re: New Control System How To
 

Well, at this risk of adding yet another place too many for info, I have installed MediaWiki on my server. I am currently working on adding all the necessary pages, syntax coloring, and possibly purchasing a domain name.

It is located at http://tom-tech.com/first/wiki in case anyone is interested.

Update: Should be up any minute at http://frcwiki.com

Re: New Control System How To
 

Kevin,

The Wall-Nuts which failed were rated for #10 wire on an AC installation so atleast 30amp.

Alan,

Our store did not have that issue. I have viewed nearly 100% of the runs of wire in our store ( I work at the Holland Menards and work with my dad (master electrician) when issues arise). The wires are all copper some larger than needed. The article was not about our store.



Don,

Now if you look at the locations of the large flat surface this is right next to the steel spring which will conduct heat and wear out the spring when continuously pushed to maximum current ratings. These are a different and much improved form of connector than what WAGO has had in years past.

Re: New Control System How To
 

In the past the victors had no current monitoring or thermal protection. Having 4 cims in locked rotor or near stall combined with the other loads provided a real shock to the power distribution system and battery. With the new speed controller they have the ability to limit the current profile to the motors. If they set the proper profile the days of clicking circuit breakers should be over. The breakers would protect from wiring faults still. This can make our power distribution system more reliable going forward.
How about the low voltage stuff. What do the beta testers think of the bumpers and side car connectors? From the picture the pneumatic bumper looks a little flimsy. Does it need mechanical support?

Re: New Control System How To
 

Ah yes, the Wall Nut.

The Wall Nut product we make is designed solely for use in solid wire, and copper only.

It does not utilize the same technology as the terminal blocks. The Wall Nut uses a leaf spring design, not the Cage Clamp. If you want to use a Cage Clamp, we make a product called the LeverNut, which is very cool. Same idea as the Wall Nut or any wirenut, but uses the Cage Clamp inside of it. It can handle 12-28 awg (I think, I don't have the spec in front of me) and solid or stranded. It also has a test port for probing with your multimeter.

The cage clamp connection is used in applications on just about every US aircraft carries, as well as all over the oil fields. These high demand environments show the robustness of our product.

It's unfortunate that someone had a problem. But that is a rare event.

Re: New Control System How To
 

They are 12-28. I love these, the only way the will fail is if you shear the wire strands themselves. They are very robust little things. They should cut the time it takes to wire the robot in half when paired with the wago connectors (not to mention repair time during competitions!).

thanks, Vivek

Re: New Control System How To
 

This wiki was also brought up on the beta forum. http://tom-tech.com/first/wiki/index...Control_System. Little information now, but if everyone posted there, it would quickly fill.

Thing is, there should probably be a standard site, so stuff isn't gap-y in multiple sites. I doubt there is one for this yet, who better to decide than the folks here at CD?

Re: New Control System How To
 

I believe this one should remain central: http://wiki.chiefdelphi.com/index.php/Main_Page