Chief Delphi - [OCCRA]: Pneumatics Part 2

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- OCCRA Q&A (http://www.chiefdelphi.com/forums/forumdisplay.php?f=140)

- - [OCCRA]: Pneumatics Part 2 (http://www.chiefdelphi.com/forums/showthread.php?t=69453)

xUrikx

03-10-2008 16:32

[OCCRA]: Pneumatics Part 2

Given a pneumatic utilizing 1 direction functionality, is it required to have a fitting in the end of the pneumatic with 1/8" tubing in the fitting for the end of the pneumatic that is only dumping to the atmosphere? Or can we take out the fitting because we are not connecting it to anything?

Mike Martus

06-10-2008 06:32

Re: [OCCRA]: Pneumatics Part 2

When components are to be connected, the 1/8 " tubing must be used.

If the component is not supplying and is venting it can be done to atmosphere.

Note several styles of cylinders have this feature built in.

All times are GMT -5. The time now is 04:31.