![]() |
pic: Early Christmas!
|
Re: pic: Early Christmas!
sorry, wrong thread.
|
Re: pic: Early Christmas!
Any comments on how the setup went?
|
Re: pic: Early Christmas!
Very cool, how do the Jags work? Must be pretty simple to set up based on how quick this is up. Do all the connectors feel nice and secure?
Also I hate to criticize, really, but how do you debug electrical problems? Seems a little messy. |
Re: pic: Early Christmas!
Originally Posted by Richard McClellan
According to the Getting Started guide, it is recommended to have 1/2" of empty space on the left and right side of each Jaguar speed controller. If you were to mount two Jaguars with their sides adjacent to each other, can this 1/2" space overlap, or would you need a total of 1" of space in between the two? Yes, the 1/2" space can overlap. -This is a post from another thread I thought you might want to consider this. Congrats on being ahead of the curve. |
Re: pic: Early Christmas!
aww im so jealuoso, we havent gotten our system yet.:(
good job goats but, clean it up.:D |
Re: pic: Early Christmas!
Quote:
Quote:
All the connectors worked fine. Wagos are easy to use. No problem about the criticism This was quick and dirty just to see how it functioned. When we decide what operations to put on the robot for testing we will do a real installation. |
Re: pic: Early Christmas!
Quote:
|
Re: pic: Early Christmas!
Quote:
The manuals do not flow in a linear pattern. You must be very careful how you follow them or you will be chasing your tail. Chapter one will point you to a specific section in chapter 5 and only that section. Then that section may point you somewhere else. You have to be real careful to go where you are pointed and then back. I would suggest that before you receive your control system that you download the manual and read if very carefully and familiarize yourself with it. It will make the whole process easier. |
Re: pic: Early Christmas!
Does anyone have advice on how we should label the wires? Is there a caveat that makes it necessary to do more than, say, "SC1-P13" (sidecar 1, port 13)? I haven't investigated the Labview code yet, so I don't know what the port nomeclature looks like in the code.
|
Re: pic: Early Christmas!
Quote:
|
Re: pic: Early Christmas!
Quote:
I believe the webcast archive also has a link in the FIRST Beta Test forums. |
Re: pic: Early Christmas!
Quote:
Having seen the presentation, I also think it was excellent....do they have the PPP posted yet? See you in Tel Aviv! |
Re: pic: Early Christmas!
I have to say, not thrilled about the amount of size that these new electronics take up...
But hey, you take what you get, eh? |
Re: pic: Early Christmas!
Quote:
|
| All times are GMT -5. The time now is 18:44. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi