Chief Delphi - HELP!!! VEX malfunction!!!

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- VEX (http://www.chiefdelphi.com/forums/forumdisplay.php?f=162)

- - HELP!!! VEX malfunction!!! (http://www.chiefdelphi.com/forums/showthread.php?t=70143)

ManicMechanic

26-11-2008 00:27

Re: HELP!!! VEX malfunction!!!

Quote:

Originally Posted by GaryVoshol (Post 777149)

I seem to recall a thread from about a year ago on this subject. If the robot stalls out under some condition, when it restarts it goes into auto mode. Check for posts from last December or maybe January or February this year.

Is this the thread you're thinking of?
http://www.chiefdelphi.com/forums/sh...ight=batteries

Anna B.

26-11-2008 10:20

Re: HELP!!! VEX malfunction!!!

We've figured out what was going on. Instead of using Rx 0 in the code, I used Rx 1. It's all better now. And, as usual, it was the programmers fault.
-Anna

Andrew Bates

26-11-2008 11:06

Re: HELP!!! VEX malfunction!!!

I'm surprised that using Rx 1 caused problems. Although I have no basis for this from my experience when you Rx0 and you have two controllers set up the one that turns on last will have control. However when you use Rx1 control will always be given to the controller plugged into Rx1 on the MC.

Jessica Boucher

26-11-2008 11:53

Re: HELP!!! VEX malfunction!!!

Using RX 0 will search for the live port and assign everything to it; so when youre using two controllers, you definitely want to stick to defining RX1 and 2.

Good to hear you're up and running again!

EricH

08-12-2008 02:57

Re: HELP!!! VEX malfunction!!!

reported

Led235

14-12-2008 16:42

Re: HELP!!! VEX malfunction!!!

just reprogram it.

Joe Ross

14-12-2008 17:13

Re: HELP!!! VEX malfunction!!!

post 20 reported again

All times are GMT -5. The time now is 03:57.

Page 2 of 2

Show 100 post(s) from this thread on one page