Chief Delphi - Missing Standoffs on Sidecar

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Missing Standoffs on Sidecar (http://www.chiefdelphi.com/forums/showthread.php?t=70317)

psyco_klown

03-12-2008 15:22

Missing Standoffs on Sidecar

Has anyone notice that there are no standoffs on the sidecar to screw down the 37 pin connector to?

Zflash

03-12-2008 15:51

Re: Missing Standoffs on Sidecar

yes and they are also missing on the dongle switch that plugs into the operator interface.

samir13k

03-12-2008 17:22

Re: Missing Standoffs on Sidecar

yeah, that has been an issue, but its not very loose luckily. On the other hand, the dongle does seem like its ready to fall off of the Linux Box. At least they provided screws for the bumpers because those things are the loosest fit connectors i have used so far.

Alan Anderson

03-12-2008 19:40

Re: Missing Standoffs on Sidecar

Quote:

Originally Posted by psyco_klown (Post 779054)

Has anyone notice that there are no standoffs on the sidecar to screw down the 37 pin connector to?

We did our bench test this evening. We quickly noticed the missing pieces, but we happened to have some in a small parts drawer, so we installed our own. We also noticed the extraneous bits on the other end of the 37-pin cable, and removed them so the connector could attach securely to the cRIO module.

All times are GMT -5. The time now is 09:02.