Controller help
 

I currently am working on a benchtop test however the vic and jag are not getting a siginal from the sidecar. the three led's are lit up on the sidecar. any ideas?
Thanks
Matt

Re: Controller help
 

Might I suggest http://forums.usfirst.org/forumdisplay.php?f=743, also known as the Beta Test forum? I would guess that someone has found this before and asked about it.

Re: Controller help
 

thanks for your help, i figured it out with the help of a mentor, was in a bind and wanted some quick advice....:ahh: :ahh: :ahh: :ahh:

Re: Controller help
 

Can you explain what you did? Our team is having the same problems.

Re: Controller help
 

I was plugging the PWM cables into the wrong side of the sidecar. They are supposed to go on the side with the white pieces of plastic separating them from each other. Make sure that it is plugged into the three prong part and i believe white facing out? Try both ways though. Sorry this isnt more specific im horrible at technical terms unless its sitting in front of me. Let me know if you need more help
Matt

Re: Controller help
 

Make sure you don't plug the PWM's in backwards, as you may damage something. Remember, GND is black.

According to the Component Datasheet (http://www.usfirst.org/uploadedFiles...-Rev-0-5a.pdf), the black should face the outside of the sidecar.

Re: Controller help
 

ok, we will try this Tuesday when we meet. I know we did plug them into the connectors under the blue tab. Thank you.

Re: Controller help
 

Thats exactly what i did first. Should work for you now!!!!!

Re: Controller help
 

Thank you, this worked.