Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   National Instruments LabVIEW and Data Acquisition (http://www.chiefdelphi.com/forums/forumdisplay.php?f=149)
-   -   Trouble setting team number in OS (http://www.chiefdelphi.com/forums/showthread.php?t=70386)

Gene F 06-12-2008 14:41

Trouble setting team number in OS
 
I can't change my team number in the driver station controller. Following the instructions and pressing the middle button for at least 4 seconds does not bring up the change team number dialog. Anyone else had this issue? I tried calling NI but their hours are M-F 7-7. If I don't hear from anyone I'll call them again Monday. :(

whitetiger0990 06-12-2008 16:03

Re: Trouble setting team number in OS
 
Have you upgraded the DS (with a flashdrive and stuff)? You won't be able to set the team number until you've updated the firmware.

EHaskins 06-12-2008 16:53

Re: Trouble setting team number in OS
 
Make sure you've upgraded the firmware, otherwise try giving it more time. Sometimes it took longer, as much as 15 seconds, for ours to go into the team number screen.

Nate Smith 07-12-2008 17:58

Re: Trouble setting team number in OS
 
Keep in mind that it's not NI that is supporting the DS, but rather Kwikbyte...they can be reached using the information in this post on the FIRST Forums...http://forums.usfirst.org/showpost.p...7&postcount=13

Gene F 08-12-2008 08:26

Re: Trouble setting team number in OS
 
Thanks to all! I had missed the upgrade step! After the upgrade all went well!


All times are GMT -5. The time now is 18:29.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi