Chief Delphi - Size of KOP Crates

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Kit & Additional Hardware (http://www.chiefdelphi.com/forums/forumdisplay.php?f=55)

- - Size of KOP Crates (http://www.chiefdelphi.com/forums/showthread.php?t=70838)

Re: Dimensions of 2009 Kitbot Box

Quote:

Originally Posted by Billfred (Post 788463)

Aaaaaactually, the 2004 robots had to fit in a 36x30x60 space. 2005 saw the start of 28x38x??. And, of course, FIRST could change it this year just to ~~spite the CADders on CD~~ ~~irritate~~ challenge us. :)

You are correct... I remembered there being a slight shift, but it not really making much difference, other than making the robot easier to shove through a doorway. we lost 2" in one dimension to gain it in the other... no big deal. I still doubt a shift away from 28x38" unless there's some radical game design requiring it.

Re: Dimensions of 2009 Kitbot Box

Quote:

Originally Posted by 1075guy (Post 788719)

I still doubt a shift away from 28x38" unless there's some radical game design requiring it.

I would imagine that something similar was said in late 2004.

Re: Size of KOP Crates

Quote:

Originally Posted by gorrilla (Post 788626)

it could be nothing but foam peanuts, unless they are the game pieces.......

Errr...you would need a lot of foam peanuts to get to just one pound...
My guess is that they're either game pieces or multiple small items just packed into one box and separated by dividers/packing peanuts/bubblewrap.

They also never mentioned how small "small" is, or specified a specific weight. That's starting to make me think that they contain something that could vary in weight and size...so each box may contain a different thing?

Re: Size of KOP Crates

got this email from another team that was organizing the kickoff i am going to.

This was in the list of stuff you need to bring

Quote:

A vehicle capable of handling the kit of parts. There will be 9 items you will pick up.
They include:
• Two shipping totes (typical FRC issue)
• One controls kit – if you did not have it advance shipped to your location (this is a
rather large box – roughly 30” x 24” x 12”)
• One drive train kit (roughly 40” x 4” x 6”)
• One battery box (with two FRC batteries – roughly 8” x 12” x 10”)
• One FedEx envelope with shipping documentation
• Three small packages with miscellaneous KOP items (only several ounces each)

so the smaill box is batteries!

Re: Size of KOP Crates

Quote:

Originally Posted by McGurky (Post 788963)

Odd, that is a differently dimensioned chassis kit than we were told before. Because of the different dimensions on the battery box, I am more inclined to believe these figures. Before we were told the chassis kit was 6"x6"x36", and they could have mislead us as to not tip us off to a new chassis size. I would not be surprised if they upped the dimensions to 30"x40" this year to help accommodate for the larger control system.

Also, as they are switching chassis kits this year, it would seem an appropriate year to change the max size.

Re: Size of KOP Crates

Quote:

Originally Posted by EricVicenti (Post 788982)

I would be very surprised if they went to those dimensions as a robot that size would ne easily fit (if at all) through a standard sized door.

Re: Size of KOP Crates

28x40" maybe, but not 30x40"... that 2" is crucial for easily getting through standard doorways, especially if you put the robot on a cart.

Re: Size of KOP Crates

Think back to the old chassis kit. It would build to a 36x36 square, but you had to cut it down to the dimensions you wanted. It will probably be the same with this one. Just because it is 40 inches long does not mean that you are allowed 40 inches in both directions. We may not even be allowed to go the full 40 inches in any direction. Even if we are, you might not want to go that long for weight purposes. We'll see tomorrow.:)

Re: Size of KOP Crates

Last year, our team fit all the crates and boxes into a honda CR-V (old small version).

~philip