Chief Delphi - Wiring analog breakout?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Wiring analog breakout? (http://www.chiefdelphi.com/forums/showthread.php?t=70970)

excel2474

31-12-2008 15:46

Wiring analog breakout?

I'm not quite sure how to power the analog breakout. Thanks for the help.

Jason Law

31-12-2008 16:40

Re: Wiring analog breakout?

Quote:

Originally Posted by excel2474 (Post 788800)

I'm not quite sure how to power the analog breakout. Thanks for the help.

You can read Chapter 3 (pg. 20 - 26) of the 2009 Control System documentation on FIRST's website (found here)

More specifically, you can find out how to pass power to the analog breakout on page 24 of Chapter 3.

Hope this helps,

Jason Law

excel2474

31-12-2008 16:41

Re: Wiring analog breakout?

Ok thanks I'll check that out.

excel2474

31-12-2008 17:14

Re: Wiring analog breakout?

Where does the analog breakout get plugged into the distribution block.

Jason Law

31-12-2008 17:20

Re: Wiring analog breakout?

Quote:

Originally Posted by excel2474 (Post 788816)

Where does the analog breakout get plugged into the distribution block.

If you look at the power distribution diagram (found here), you will find that the analog breakout is connected to the 30A connectors on the power distribution board.

Hope this helped,

Jason Law

excel2474

31-12-2008 17:30

Re: Wiring analog breakout?

Ok, thanks for the help.

All times are GMT -5. The time now is 10:56.