Chief Delphi - pic: Orbitz ball modeled in ProE

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: Orbitz ball modeled in ProE (http://www.chiefdelphi.com/forums/showthread.php?t=71106)

rachakate

03-01-2009 23:59

pic: Orbitz ball modeled in ProE

loading photo ...

Xeno_117

04-01-2009 00:01

Re: pic: Orbitz ball modeled in ProE

I was just wondering: you have 6 straps. what diameter were they?
(porting similar item to my own personal "CAD" program)

commodoredl

04-01-2009 11:24

Re: pic: Orbitz ball modeled in ProE

According to the manual, the straps are 1 inch wide and form a 9 inch diameter sphere.

rachakate

04-01-2009 13:29

Re: pic: Orbitz ball modeled in ProE

The straps do not have a "diameter" They are pentagons with big rounds on the corners. Using a round strap would have interference between straps. When you use the pentagon, assemble the straps so that the point of one crosses the flat of another one.

Woody1458

04-01-2009 15:47

Re: pic: Orbitz ball modeled in ProE

as usual the manual seems to oversize the game pieces. I put the size at 8.5" diameter based on my sizing.

All times are GMT -5. The time now is 11:40.