Hey anybody have the kit in cad
 

if anybody does and they are willing to direct me in links or some how get me the cad files it would highly be appreciated

Re: Hey anybody have the kit in cad
 

im not sure if you can use inventor files in solidworks but if you sign up on autodesk firstbase then you pretty much have the whole KOP.

heres the link: http://firstbasefrc.autodesk.com/?nd=kitofparts
but you need an account to access it so contact your lead mentor about setting up an account.

Re: Hey anybody have the kit in cad
 

cool thanks but i'd prefer one without registration through the school it'll involve a bit of effort i'd like to refer to registration as last resort

Re: Hey anybody have the kit in cad
 

this one is pretty old but its still good for some parts
http://www.firstcadlibrary.com/
this one is for 09
http://www.catalogds.com/db/service?d=first&c=browse

Re: Hey anybody have the kit in cad
 

thanks but i already had those i was hoping for a different resource

Re: Hey anybody have the kit in cad
 

if possible is there a site that packges all the cad files together for download instead of giveing them off one by one

Re: Hey anybody have the kit in cad
 

Sorry seanl i was so busy with an assignment i'm doing I forgot to thank you especially for continuing to help me and any one else out there requireing help with this as well out

Re: Hey anybody have the kit in cad
 

I am looking for all of the 2009 kit of parts for solidworks all of the files I can find are for Inventor and pro engineer.:yikes: Any help would be great. thanks:

Re: Hey anybody have the kit in cad
 

SolidWorks should be able to open Inventor files and sometimes ProE files.
Another site to try is www.3dcontentcentral.com . Search for 'First' or 'robotics'.

Re: Hey anybody have the kit in cad
 

umm... thanks i'd like a a site without registration off the top

Re: Hey anybody have the kit in cad
 

seanl had originally given me a link http://www.catalogds.com/db/service?d=first&c=browse which now has a link to download all of the kit in one download and the first cad libary as well which is a high resource and i'll be using it a lot now pleas though post you're resources to help the rest of the CD community

Re: Hey anybody have the kit in cad
 

Greetings - I am a solidworks user and just got off the phone with our service company.
1) Solidworks will not open inventor 11 files unless you have both inventor and solidworks on your computer (not me)
2) Solidwork will not open Pro e files from Wildfire 4 (which I am assuming is bundle of parts you can find out there now), and it will not be able to convert them until SP3 comes out - not released yet

Your best bet will be to get somebody to export them in STEP or IGES. Anybody found any package of parts in STEP?

THX:(

Re: Hey anybody have the kit in cad
 

thanks dude i was going to make this aware but i guess you beat me i tried and i had it saying process and waited so long until i gave up and quit

Re: Hey anybody have the kit in SolidWorks cad
 

It looks like the PRO-E files made available are in a new format that isn't supported by my SolidWorks Student Edition (2008-2009)

All is not lost!

Some parts from the kit are already in SolidWorks format. Available at http://www.3dcontentcentral.com/part...true&l evel=1
and yes, you need a 3dcontentcentral login but it's Free.

Some parts are in STEP format that SolidWorks can open:

i.e. You can get the C-Base Drive Chassis - Official Drive Base Frame for the 2009 FIRST Robotics Competition. from:
http://www.andymark.biz/am-0205.html

The chassis link is:
C-Base Long CAD File (.stp format, right click and Save As)

The Rover wheels are here:
http://www.andymark.biz/am-0284.html

You can get quite a few of the parts from the http://www.andymark.biz home page, and also if you browse through their site.

Here's how to open STEP files and save them in SolidWorks format (in case you wanted to know):

In SolidWorks, click File > Open, then change the "Files of type" to STEP AP203/214 (*.step, *.stp)
Browse to where you saved the file and click Open.
SolidWorks will open the file and convert it into it's own format which you can then save.

Hope that helps. :)

Re: Hey anybody have the kit in SolidWorks cad
 

any idea on makeing the speed of opening faster it's pretty laggy

Re: Hey anybody have the kit in SolidWorks cad
 

It opens fast for me. You might need more memory in your computer or a faster cpu. How much memory do you have? I'm running a Intel Core 2 Duo with 2GB RAM and there is no lag.

You might also try defragging your hard drive to speed up part loads.

Re: Hey anybody have the kit in SolidWorks cad
 

who knows i'll try a bit later and post the results

Re: Hey anybody have the kit in cad
 

Even with having to register, www.3DContentCentral.com is a great resource. You will not only use it in FIRST but also if you go on to become a professional designer. If you have non SolidWorks format files, then I would use STEP. Most likely the components you will download are purchased components and you will not modify them. You want these components to be as lightweight as possible. Add reference axis or plane if you need to (Insert, Reference Geometry, Plane). Concentrate on your value added to the design, the parts you have to machine - you are now down to 5 weeks. Marie

Re: Hey anybody have the kit in SolidWorks cad
 

Suj, the one time you open the step file it WILL lag a bit of your computer is not "up to speed".
The one time lag is ok, but just let it process the step file completely & correctly, & finish opening.
After it is opened, you will notice that is is now in your working directory as a .sldasm file with seperate .sldprt files for each of the components.

The next time you open that .sldasm file, if it does not open as quick as you would like, there is a way to get around that which I use.

I know this sounds strange, but ANY SolidWorks assembly can be saved as a part file & will open a lot faster the next time since it is now a single file, & not many files spread out over your working directory.

I advise this technique ONLY if you don't need to move any parts on the "assembly" or modify any parts later.
(This will obviously require a bit of insight on your part).

(For example, I just performed this technique on the C-Chassis assembly file because in my application, it is a static item, which I will not need to move or modify any individual parts on.
On the other hand, the Toughboxes, I may want to be able to move around the gears in the future, so keeping it as an assembly was ideal for my application.

Your results may vary, but this has worked for me in the past to keep the files sizes & number of files to a minimum.


Btw, when you click to save an assembly as a part file, select the "All components" in the radio button options within the "save as" dialog box for best resuts or experiment to see what works best for you.

Re: Hey anybody have the kit in cad
 

Some manufacturers offer models for their own parts, often in .STP format (or, rather, not always in .sldprt/sldasm). I recall Bimba offered actuator models (which I also recall are on 3dcontentcenteral in .sldprt form).

Re: Hey anybody have the kit in cad
 

Your best bet is to get your model from someone you can trust. The manufacturer, certified suppliers like Bimba and SMC on 3DContentCentral, or you confirm the model to the data sheet.
We redid the 2008 kop based on Ed Sparks models and the suppliers that we could find part numbers for. Ed has good, valid models that you can trust. Unfortunately, SolidWorks models, not from SolidWorks manufacturers can only be worked on only after the kop announcement. But there are many FIRST suppliers that use SolidWorks or produce parts on 3DContentCentral.

Someday I hope to post all FRC models on 3dcontentcentral in multiple languages and multiple file formats - but that politics just didn't work out. We have the technology that would help all teams not matter what software they use.

I am doing a Boston FIRST SolidWorks robot design workshop on Tuesday, maybe I will see more models there and can help you out more. Marie

Re: Hey anybody have the kit in cad
 

Somebody please inform FIRST that with the number of teams competing global it is shear stupidity to believe we all use PRO/Engineer or that we have the most bleeding-edge version of some application which will understand the bleeding-edge Pro/E format that was used.

The Pro/E files do not open under any version of SolidWorks, I have access to both the student version and 2008SP0. MasterCAM is also unable to open them.

We are not going to go out and buy Pro/E just for a six week FIRST project.
We are going to form an opinion of FIRST's ability to support the teams. (Hint: It's not a good opinion.)

I cannot believe the number of times I have to educate people about one simple common fact: when making data public, always use a common, standard, open format. FIRST failed this and now their CAD library, that somebody put a lot of time and effort into, is all but useless.

Would somebody with Pro/E please convert the files to a format useful to the other 95% of us?

Thank you.

Re: Hey anybody have the kit in cad
 

well they know there a main reason that alot of teams are using other cad programs but it's kind of stupid that their not up to date with other formats like proe and step who actualy uses the program involved with that file type

Re: Hey anybody have the kit in cad
 

just throwing this out there but does anyone have a converter since wait times to long on the actual solidworks 09 app idk why really i'm running it on 2gb of AMD mobile semperon vista home premium

Re: Hey anybody have the kit in cad
 

Unfortunately, Autodesk made the 2009 KoP native files and not inventor ones...its a royal pain to have to manually cut and modify them...

Most, if not all, Inventor parts can be read in Solidworks and Pro E.

Re: Hey anybody have the kit in cad
 

Thank you to the Boston First Regional teachers/mentors at my workshop Tuesday that showed me AndyMark's web site and the 2009 Slick Wheel. I worked on taking the step file and making it into a SolidWorks smart file and placing it on www.3dcontentcentral.com. Through FeatureWorks, I made the bearing parametric. Just the bearing to keep file size down.

http://www.3dcontentcentral.com/part...atalogid=171#0

You can also download the complete assembly, not only for SolidWorks 2007, 2008, but also for Pro|E prior to Wildfire 4 and eariler Inventor files. Autocad is also there too.

I really believe students need to know how to work with different file formats - I hope this helps. AndyMark parts from last year already posted on 3dcontentcentral with the help of Ed Sparks.

I will work on the C chassis and try my best to do any other components developed by manufacturers that want to use 3dcontentcentral.

What are the most critical parts you need?

I have been receiving jpeg images from many teams we support - showing cool parts- just place them on 3dcontentcentral, so everyone can share - no mater what cad system you use.


Marie