help:Downloading the project in windriver
 

hellow there .... our team is using the c/c++ programming by windriver ... we have a sample code that we got from the windriver examples... but there is a problem when we try to Debug our project to the Crio ... we have to put some information about the ip address and that stuff....
there is a picture in the attachment files ... i hope that can help u understanding my problem ...

number1: in our project its a blank one- we tryed to add connection but we didn't succeed.

number2: all the time it shows ... " ..... is not connected"

number3: when we click "add" ... what to do then ... i don't have this screen becuase i am not on our labtop.

number4: what are these information ??

i read in this guide: http://first.wpi.edu/Images/CMS/Firs...de_for_FRC.pdf
but it doesn't explaining everything about the connection ...

i hope u understood my problem ... please i am waiting for ur help ...
thanks
team 1946#

Re: help:Downloading the project in windriver
 

hey i am still waiting :ahh: :D

Re: help:Downloading the project in windriver
 

It is in the guide... I don't recall off hand what we had to do to make it work, but it was annoying at first. The big thing is you need to create the correct connection to the bot -- I'd recommend pinging it to ensure that you actually *can* connect first.

Re: help:Downloading the project in windriver
 

can someone tell me how to create the connectttion ? i am sure there is connecttion becuase i ping the crio my pc founded it ... i upgrade the image and it succeed but i need how to make the connection in windriver so i can download the program ...
thax for ur help waiting for other

Re: help:Downloading the project in windriver
 

Please follow the instructions given in this document.

http://first.wpi.edu/Images/CMS/Firs...de_for_FRC.pdf

The relevant part starts at around page 85.
When you have more specific questions, please post them.

Re: help:Downloading the project in windriver
 

thank you ... that what i want :D