How to store a program on the Drive Station?
 

I figured out how to program the robot but everytime I shut off the robot or the DS I have to reinstall it back on to the DS. How am I able to store the program on the DS so I dont have to program it everytime?

Re: How to store a program on the Drive Station?
 

In chapter four of the FRC Programming guide at ni.com/first they explain how to create a stand alone FRC Application, which will do what you want.

http://decibel.ni.com/content/servle...ming_Guide.pdf

Re: How to store a program on the Drive Station?
 

Teams cannot program the DS. They can only program the cRIO, a Dashboard and any custom circuits that they incorporate.

To program the cRIO and have it run an application at power-up (and hold that app over power cycles), refer to the doc linked to by mgurgol.

Russ

Re: How to store a program on the Drive Station?
 

You should also bookmark the primary launchpad site for all such documentation.

http://www.usfirst.org/community/frc....aspx?id=10934

Russ