2007 Controller Power cable?
 

I'm not electronics--I'm mechanical--so I have no idea what I should be looking for. We're prototyping our robot with our robot from 2007, but we lost the power cable to the controller. What are the relevant...stats? Details? about that cable? We're wondering if we can replace it with some other stuff we have around the room.

Re: 2007 Controller Power cable?
 

If you are talking about the crio you need to supply your own cable, look at the first electrical diagram

If you are talking about the drivers station you need to use the supplied adapter. Let us know what you are talking about.

Re: 2007 Controller Power cable?
 

He said 2007. I believe he meant the OI for the IFI control system. I don't have the specs for this supply at the moment, but hopefully someone else will be able to help you out.

Re: 2007 Controller Power cable?
 

ok sorry im tired :) i should have read better. ya i do not have this handy either. But i can look it up tomorrow for you.

Re: 2007 Controller Power cable?
 

Should be the same as the one in this thread
http://www.chiefdelphi.com/forums/showthread.php?t=48364&highlight=operator+interfac e+power+supply

your looking for a wall wart power transformer, there is a photo in the thread showing the label

Re: 2007 Controller Power cable?
 

I believe they were 9V 1500ma. Center pin positive.

Re: 2007 Controller Power cable?
 

I'm not in our shop right now, so I can't be sure, I think it says EVERGLOW in big letters on it

Re: 2007 Controller Power cable?
 

The IFI website has all the info you would want or need on their control system.
http://www.innovationfirst.com/