Chief Delphi - Mobile Device Controller

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Mobile Device Controller (http://www.chiefdelphi.com/forums/showthread.php?t=72453)

Mobile Device Controller

Since we haven't gotten ours.......We just wanted to know if anyone has gotten their mobile device controller power adaptor in your kit of parts. Thanks! :confused:

Re: Mobile Device Controller

? The kit doesn't include a power supply for the cRIO (aka Mobile Device Controller). You're expected to connect it to the PD per the Power Distribution Diagram.

Russ

Re: Mobile Device Controller

Quote:

Originally Posted by emhw1994 (Post 803932)

Since we haven't gotten ours.......We just wanted to know if anyone has gotten their mobile device controller power adaptor in your kit of parts. Thanks! :confused:

Already attached to the cRIO is one half of the connectors you will need to make your cable. On the end the little black connector with 4 holes. In your KOP there should be another one, using these two connectors use a piece of 2 conductor wire 20 AWG or larger (meaning larger diameter).

-Mike AA