Power cunsumption
 

:confused:
All right. Does anyone have a gragh or something that contains all of the stats for the components, such as the voltage, current, and wattage. Thanks:)

Re: Power cunsumption
 

which components are you specifically interested in?

Re: Power cunsumption
 

We need the CRIO and the digital side car.

Re: Power cunsumption
 

The cRIO is capable of drawing 20W, but usually draws about 10W.

The DSC is capable of drawing 45W, but usually draws less than a tenth of that. The unloaded use is close to zilch, as it is just a few LEDs and some simple logic. The real load is what you attach to it - Servos, mostly. To eyeball it, total up your outputs and assume 90% efficiency in the switchers. Then add a little margin on that for the LEDs.

Both of these use switching supplies, so Watts is the correct unit to work in.

If you are interested, the datasheet and schematic for the digital sidecar are posted. It will be probably be easier to just measure the draw.

Re: Power cunsumption
 

Thanks so much for all of that. :D