Unable to set team number
 

We've had a couple problems with our driver station. We can't really do much of anything with it because we can't do the following:

Driver station team number change doesn't work.
Driver station software upgrade drops-out after holding "select".

The procedure we are stuck on is in section 3.1.5: Setting Team ID and Updating the DS software of the Control Systems Manual.

Has anyone else come across these problems with the station? Any idea as to a solution?

Re: Unable to set team number
 

We were not able to set the team number until after the software upgrade. Others have stated the same.

Search on the Usfirst labview robotics forums - there are several problems there similar to yours where people have been walked through different solutions.

Re: Unable to set team number
 

that's becuase you didn't succeed to upgrade the driverstation
i think that happend becuase u didn't remove the autorun file on the flashdisk
you should remove it then be sure that u put it on usb1 in the driverstation...Read The Manual

Re: Unable to set team number
 

I do want to add one thing. Make sure the file is correctly named.

Re: Unable to set team number
 

I see someone watches Arby n' the Chief.