Chief Delphi - Put a Jaguar PWM cable on electric break switch?

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Put a Jaguar PWM cable on electric break switch? (http://www.chiefdelphi.com/forums/showthread.php?t=72598)

wt200999

21-01-2009 16:50

Put a Jaguar PWM cable on electric break switch?

I'm sure it is possible, but would it be legal to have a pwm cable on the elecronic break jumper so that you can switch it between the electronic break and no electric break during a match?

Ted Weisse

21-01-2009 16:54

Re: Put a Jaguar PWM cable on electric break switch?

Only need to feed the middle lead on the coast/break connector. See the getting started guide here:

http://www.luminarymicro.com/jaguar

READ the Manual....

Joe Ross

21-01-2009 16:55

Re: Put a Jaguar PWM cable on electric break switch?

See <R60>

All times are GMT -5. The time now is 18:58.