Encoder Mounting Pads - Drawings?
 

Were we supposed to get the AM-0208 mounting pads with the encoders in the Kit of Parts (KoP)?

-- http://store.andymark.biz/am-0208.html

I don't see it in the checklist, nor can I find a drawing for making them on the AndyMark site...

(OOC, Has anyone whipped up a drawing for making your own yet? We don't have a lot of time to order them, and it would seem simple enough to make, given the dimensional specs...)

- Keith

Re: Encoder Mounting Pads - Drawings?
 

If it wasn't on the bill of materials provided online, then no you weren't supposed to get one. The mount pad is only $4 if you need one from AndyMark. Also I would whip one up for you, but my cadding computer is in the shop. sorry.

Re: Encoder Mounting Pads - Drawings?
 

I have a mount CADded up, email me and I'll send you the inventor part.

-Vivek

EDIT: I suppose I could make a drawing if I have to. :P

Re: Encoder Mounting Pads - Drawings?
 

I would really appreciate it if you could post a CAD of the pad on Delphi..

Re: Encoder Mounting Pads - Drawings?
 

We forgot to order them from AM and had to make our own.

One thing you may have to do if you make them yourself is replace the 4-48 screws with 4-40's. You may have to file the encoder parts a little with a jewelers file to get them to fit. Or, if you have a 4-48 tap that’s cool too :)

The indent in the back of the plate is excessive. It is there b/c our shafts were slightly too long, and we didn't want them to rub.

Took about half an hour to set up and make on the CNC.

Re: Encoder Mounting Pads - Drawings?
 

much thanks