Chief Delphi - Broken Jaguar

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - Broken Jaguar (http://www.chiefdelphi.com/forums/showthread.php?t=72653)

nekng

21-01-2009 23:45

Broken Jaguar

So I have a total of 4 cims running off of 2 jaguars (2 cims per jaguar, I know that in retrospect that it may have been stupid but I was told that it should not cause any problems). After being completely functional for a while (as seen here) one of the jaguar's lights in now consistently red when the robot is enabled, however it flashes just like the other jaguar when the robot is disabled. Is there anything that I can do to fix it?

DonRotolo

22-01-2009 00:22

Re: Broken Jaguar

Can't say, but you do know that every CIM on the competition robot needs it's own jaguar (or Victor), right?

Quote:

<R54> All electrical loads (motors, actuators, compressors) must be controlled by relay or PWM output signals sent by the Digital Sidecar to an appropriate power regulating device
A. Each CIM motor and Fisher-Price motor must be connected to one Victor or Jaguar speed controller. They must not be connected to relay modules.
<snip>

nekng

22-01-2009 02:01

Re: Broken Jaguar

Quote:

Originally Posted by Don Rotolo (Post 805706)

Can't say, but you do know that every CIM on the competition robot needs it's own jaguar (or Victor), right?

Ya, that I know, the bot that that jaguar was on was just a test bot that we used to test the 2009 wheels.

All times are GMT -5. The time now is 23:02.