Chief Delphi - Team 2415 Teaser #2

Page 1 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Team 2415 Teaser #2 (http://www.chiefdelphi.com/forums/showthread.php?t=72714)

RMS11

22-01-2009 20:38

Team 2415 Teaser #2

RMS11

22-01-2009 20:59

Re: Team 2415 Teaser #2

Dan2081

22-01-2009 22:25

Re: Team 2415 Teaser #2

zomg a couch in your shop!?!?! lucky..

Akash Rastogi

22-01-2009 22:40

Re: Team 2415 Teaser #2

Ohhh. Akash like the drivetrain design.:yikes:

RMS11

22-01-2009 22:49

Re: Team 2415 Teaser #2

Quote:

Originally Posted by Akash Rastogi (Post 806259)

Ohhh. Akash like the drivetrain design.:yikes:

Thanks!

Andrew Y.

22-01-2009 23:10

Re: Team 2415 Teaser #2

Quote:

Originally Posted by Dan2081 (Post 806247)

zomg a couch in your shop!?!?! lucky..

HAHAHA It was donated from someone last year. I never really sit in it... but it is confy:D

RMS11

22-01-2009 23:13

Re: Team 2415 Teaser #2

Quote:

Originally Posted by Andrew Y. (Post 806288)

HAHAHA It was donated from someone last year. I never really sit in it... but it is confy:D

Haha u are always sitting on in while u watch us students hard at work. :D

=Martin=Taylor=

22-01-2009 23:49

Re: Team 2415 Teaser #2

Is it just me... or is that a smiley face on the side :yikes:

I more than approve...

Andrew Y.

23-01-2009 00:23

Re: Team 2415 Teaser #2

Quote:

Originally Posted by Hachiban VIII (Post 806312)

Is it just me... or is that a smiley face on the side :yikes:

I more than approve...

Yes...it is a smiley face... our guys got a little carried away:rolleyes:
took us almost 4 hours on the waterjet to finish those 4 plates:eek: ...i blame the smileys:D

sdcantrell56

23-01-2009 01:49

Re: Team 2415 Teaser #2

Where are you guys using a waterjet? Is it through Georgia Tech?

RMS11

23-01-2009 07:15

Re: Team 2415 Teaser #2

Quote:

Originally Posted by sdcantrell56 (Post 806371)

Where are you guys using a waterjet? Is it through Georgia Tech?

No, a place in Woodstock called Capital Fabrication generously lets us use their waterjet. :D

sdcantrell56

23-01-2009 09:10

Re: Team 2415 Teaser #2

O cool. I remember calling them in 2007 I think to get some machine time. Good for you guys. Nice drivetrain. It looks super beefy. Whats the weight? O and why the monster spur gears?

Andrew Y.

23-01-2009 09:40

Re: Team 2415 Teaser #2

Quote:

Originally Posted by sdcantrell56 (Post 806371)

Where are you guys using a waterjet? Is it through Georgia Tech?

nope, second year sponsor.

I wanna say waht you see there weights in at 11lbs...but i cant remember for sure. The monster spur is for the reduction we wanted in a single step:yikes:

RMS11

23-01-2009 10:21

Re: Team 2415 Teaser #2

Quote:

Originally Posted by Andrew Y. (Post 806455)

nope, second year sponsor.

I wanna say waht you see there weights in at 11lbs...but i cant remember for sure. The monster spur is for the reduction we wanted in a single step:yikes:

Yes it is 12 LBS per module, plus about 3 for the crossbeams, so probably about 27lbs total for the drive. The spur gears are about 1.5LBS a piece, but if weight is a problem we will take weight out of those, if not it will be nice to have that weight down low. :D

sdcantrell56

23-01-2009 10:57

Re: Team 2415 Teaser #2

Thats not too bad on the weight. Yeah those gears could easily be turned down to cut weight. What are you planning for the upper part of the bot?

All times are GMT -5. The time now is 18:56.

Page 1 of 2

Show 100 post(s) from this thread on one page