Chief Delphi
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Team 935 Chasis (http://www.chiefdelphi.com/forums/showthread.php?t=72823)

R.C. 24-01-2009 20:51
Re: pic: Team 935 Chasis
 
Quote:
Originally Posted by ironbears (Post 807416)
a true machinist handles that we ran our machine for 12 hours today. nothing unusual
That may be true but machining out plates is a lot harder than doing 1x2 tubes. We have a router (thatz why probably) and are those sides waterjetted or Cnc'd. Just wanting an official word from the team Cory. Also most teams don't have a CNC and a 12 hour day is a lot for a FIRST team. On the brighter note, that chassis is so sick!!!!:ahh: :ahh: :ahh: :ahh: .

Cory 24-01-2009 21:00
Re: pic: Team 935 Chasis
 
Quote:
Originally Posted by rc_cola1323 (Post 807426)
That may be true but machining out plates is a lot harder than doing 1x2 tubes. We have a router (thatz why probably) and are those sides waterjetted or Cnc'd. Just wanting an official word from the team Cory. Also most teams don't have a CNC and a 12 hour day is a lot for a FIRST team. On the brighter note, that chassis is so sick!!!!:ahh: :ahh: :ahh: :ahh: .
Almost definitely milled. the pockets are far too smooth/shiny for a waterjetted surface.

R.C. 24-01-2009 21:04
Re: pic: Team 935 Chasis
 
True, just enlarged the pic after your comment.

hipsterjr 25-01-2009 00:29
Re: pic: Team 935 Chasis
 
just had to say, that chassis is the sexy. I extend my sincerest props to the machinist.

railerobotics 25-01-2009 23:11
Re: pic: Team 935 Chasis
 
thanks for the comments, i know that our machinist's really appreciate that comments. and yes, those are handles in the chassis:D

railerobotics 26-01-2009 08:08
Re: pic: Team 935 Chasis
 
Quote:
Originally Posted by Cory (Post 807197)
Those plates look like they were all milled and not waterjetted.

Your poor machinist :eek:

Looks pretty sweet.
No Kidding! Thank goodness for Machine Technology Program and Students!!:yikes:

Magnechu 26-01-2009 18:47
Re: pic: Team 935 Chasis
 
Dean Kamen engineer that himself?

5n1p3r 27-01-2009 21:01
Re: pic: Team 935 Chasis
 
a nice big tank of Nos would solve that weight problem lol. (be warned, not an actual idea, just an idiotic comment made for public humor)

daltore 27-01-2009 22:06
Re: pic: Team 935 Chasis
 
So THIS is where that pile of shavings came from.

Hal9000 27-01-2009 22:26
Re: pic: Team 935 Chasis
 
that thing looks incredibly strong. It should work well for the high speed collisions FIRST is predicting


All times are GMT -5. The time now is 21:13.
Page 2 of 2 < 1 2
Show 100 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi