Chief Delphi - Panel Signal Device

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Panel Signal Device (http://www.chiefdelphi.com/forums/showthread.php?t=72838)

Team 1413

24-01-2009 12:18

Panel Signal Device

Where should this be located?

eitang

24-01-2009 12:41

Re: Panel Signal Device

Here you go:

Quote:

<R58> ROBOTS shall use the diagnostic Robot Signal Light provided in the Kit Of Parts. It must be
mounted on the ROBOT such that it is easily visible while standing three feet in front of the
ROBOT in the STARTING CONFIGURATION. The Robot Signal Light must be connected
to the “RSL” supply terminals on the Digital Sidecar, which provides power and control for
the light. The team has no direct control over the light and no programming is required.

Al Skierkiewicz

25-01-2009 20:44

Re: Panel Signal Device

Team,
Please make sure the light is securely mounted and inside the robot frame where it will not be torn off during competition. You can find wiring information of the Robot Wiring Diagram on the First Website.

NorviewsVeteran

25-01-2009 20:48

Re: Panel Signal Device

ALSO make sure that it is on the FRONT. Otherwise you show up on the field with a robot facing the wall. And this year you'd really be out of luck with the trailers.

FRONT

All times are GMT -5. The time now is 10:48.