Chief Delphi - Trouble connecting to cRIO?

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Trouble connecting to cRIO? (http://www.chiefdelphi.com/forums/showthread.php?t=73136)

MikeDubreuil

30-01-2009 14:10

Re: Trouble connecting to cRIO?

Since I have experienced a similar issue, it sounds like this. What I would do is allow it to run on your cRIO for 20 minutes. See if you experience the same thing I reported in that thread.

RMiller

30-01-2009 14:56

Re: Trouble connecting to cRIO?

Is your version of LabView different than what your cRio needs to run off of?
See here for our issues with that: http://www.chiefdelphi.com/forums/sh...ad.php?t=72406

darty

31-01-2009 16:15

Re: Trouble connecting to cRIO?

Hey RMiller, your suggestion seemed like the most likely problem, so I walked into a meeting today with that as my prime suggestion, turns out another team member looked into it and reached the same conclusion. As soon as we get our laptop we'll check..

All times are GMT -5. The time now is 21:23.

Page 2 of 2

Show 100 post(s) from this thread on one page