Chief Delphi - another festo problem

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)

- - another festo problem (http://www.chiefdelphi.com/forums/showthread.php?t=73158)

Team2883

28-01-2009 23:25

another festo problem

We have the compressor working, the code working. The light comes on, on the silenoid, but does not fire. Any suggestions? Thank you again.

~ Fighting Rednecks ~

Trent B

28-01-2009 23:31

Re: another festo problem

Do you have air volume tanks? Sorry I asked :rolleyes:

Post a picture of your pneumatics setup.

How is your solenoid connected?

Have you tested output with volt meter

Team2883

29-01-2009 00:09

Re: another festo problem

We were able to figure it out...we had the connections mixed up on the solenoid

~Fighting Rednecks~

Trent B

29-01-2009 23:47

Re: another festo problem

Quote:

Originally Posted by Team2883 (Post 810182)

We were able to figure it out...we had the connections mixed up on the solenoid

~Fighting Rednecks~

That always results in a lot of frustration, good to hear you fixed it.

nevereverregret

11-02-2009 20:22

Re: another festo problem

do you hear the click that means the vaulves are swiching?

All times are GMT -5. The time now is 16:45.