Chief Delphi - Update 3a Problem

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- NI LabVIEW (http://www.chiefdelphi.com/forums/forumdisplay.php?f=182)

- - Update 3a Problem (http://www.chiefdelphi.com/forums/showthread.php?t=73309)

atr15566

31-01-2009 11:38

Update 3a Problem

After trying to correct new problems with the update, I'm stuck. When we try to run the program, an error 44085 "Library Expecting Version 2009, 1.0.0" keeps appearing. After continually pressing continue, I get an Error 7 "Call Library Function Node in DriverStarion.lvlib:Start Communication.vi->Untitled 1". After stopping we get Error 63192 "_nirio_device_open.vi:1". We reimaged cRIO twice, and got the same problem.

TDohse

31-01-2009 12:10

Re: Update 3a Problem

Quote:

Originally Posted by atr15566 (Post 811572)

error 44085 "Library Expecting Version 2009, 1.0.0"

This looks like you have the latest software on your PC, but not on the cRIO. 1.0.0 is the final FPGA revision. Can you verify that you reimaged with FRC_2009_v11.zip successfully? The FPGA version and revision are printed to console at boot if you have the console out toggle switch set to On. You can also ftp to the cRO and look at the frc image version text file.

Bobert

11-02-2009 22:27

Re: Update 3a Problem

I also have the same problem. I've updated the cRio, labview and the DS. Still can't deploy.

Greg McKaskle

12-02-2009 07:51

Re: Update 3a Problem

When you updated the cRIO, did you format it? If it took thirty seconds, you forgot to hit the checkbox to format. Formatting takes about fifteen minutes.

Greg McKaskle

All times are GMT -5. The time now is 08:51.