Chief Delphi - Problems after 3rd update applied

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- FRC Control System (http://www.chiefdelphi.com/forums/forumdisplay.php?f=176)

- - Problems after 3rd update applied (http://www.chiefdelphi.com/forums/showthread.php?t=73384)

pheisinger

31-01-2009 23:19

Problems after 3rd update applied

We had the cRIO, a Jaguar, Victor, etc. working in a test rig with the 1st update. Tore everything down, put it on the robot, and applied update 3 (Labview)

Now Jaguars and Victors just blink. RSL light on sidecar is on solid.
We've doublchecked driver station version and reapplied download to cRIO.
No change.

Is anyone else having similar problems?

popo308

31-01-2009 23:26

Re: Problems after 3rd update applied

Quote:

Originally Posted by pheisinger (Post 812006)

We had this problem with update #2... When it happened to us we just re-downloaded the CRIO image and it worked.

I guess something went wrong when it was updating the image the first time around.

Try that out

gwilliam

11-02-2009 18:28

Re: Problems after 3rd update applied

We're having the same problem. I just reimaged the cRIO and reloaded a program and we still have blinking Jaguars and a solid light on the breakout box. Any ideas?

chmp09

13-02-2009 22:47

Re: Problems after 3rd update applied

First of all what is the battery displaying on the DS?

If it says no comms, then make sure that your DS and cRIO are set to your team number. When you updated you DS, it should have reset the team number to 0000.

All times are GMT -5. The time now is 22:57.