Problems with the connections to the Keyang motor
 

We are using a Keyang motor(Keyang motor,12-tooth , PN: 16631023 ,Flowers Tote) in this year's robot, and we are having problems connecting it to power.
Last year's connectors to this motor do not seem to fit and we do not have a clue on where can we find this connector...


Did anyone encounter this problem too?
Because we prefer no to weld the cable to the motor.


I would appreciate your quick response,
Nofar Hamrany, NEAT-TEAM #1943, ISRAEL

Re: Problems with the connections to the Keyang motor
 

Here's a thread on that subject.

Soldering directly to the terminals, when done carefully, is considered a reasonable alternative.

Re: Problems with the connections to the Keyang motor
 

We just solder the wires straight to the terminals