Chief Delphi - Failed to Connect after reinstall

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- C/C++ (http://www.chiefdelphi.com/forums/forumdisplay.php?f=183)

- - Failed to Connect after reinstall (http://www.chiefdelphi.com/forums/showthread.php?t=73772)

Blooper4912

06-02-2009 20:00

Failed to Connect after reinstall

Quote:

Error connecting to 'VxWorks6x_10.25.35.2" (Registry localhost). Failed to launch target server
Possibly caused by: Back-end not connected.

Was the message we received after reinstalling Wind River to try make the robot load our code, when it was connecting but having no noticeable impact on the actions of the robot. Now we can't connect to the cRIO at all

Fatality

06-02-2009 20:27

Re: Failed to Connect after reinstall

Make sure that you have the most recent updates not only for windriver (workbench 3.0.1718) but also the cRio (FRC_2009_v11)

gokul

07-02-2009 13:04

Re: Failed to Connect after reinstall

Quote:

Originally Posted by Blooper4912 (Post 815591)

Using the FRC cRIO imaging tool, change your environmnet to Windriver.

If you are able to ping your cRIO but are not able to connect through Windriver - probably you have the LabView environment loaded.

Please post your findings.

All times are GMT -5. The time now is 02:43.