pic: Team 548 Teaser (What could this be?)
 

Re: pic: Team 548 Teaser (What could this be?)
 

maybe, a gate to stop balls from going into your shooting device:confused:

Re: pic: Team 548 Teaser (What could this be?)
 

ELABORATE camera mount? if so looks good.

Re: pic: Team 548 Teaser (What could this be?)
 

Ganging servos... I'll go with gorilla. Either that or it's an aiming device power source.

Re: pic: Team 548 Teaser (What could this be?)
 

I agree Eric. It looks like all 3 servos will be put to use for 1 thing that turns. That 1 thing will go in the middle of all the servos.

Re: pic: Team 548 Teaser (What could this be?)
 

Well whatever it is, apparently one servo wasn't good enough...

Re: pic: Team 548 Teaser (What could this be?)
 

Hint: We finally found a lightweight solution...

Re: pic: Team 548 Teaser (What could this be?)
 

Driving your turning with servos?

Re: pic: Team 548 Teaser (What could this be?)
 

A nice looking piece of art :P

Re: pic: Team 548 Teaser (What could this be?)
 

is it some odd method for turning ur bot on a little to no traction?

Re: pic: Team 548 Teaser (What could this be?)
 

i agree that it is a gate for a shooter. however if you have any pneumatics whatsoever on your robot, that thing is completely over kill because you could use one of the rotary actuators(what were using)

Re: pic: Team 548 Teaser (What could this be?)
 

Perhaps that's what he meant by saving weight, as pneumatics adds a lot of unnecessary weight to the robot. (Tanks, Solenoids, Spikes, Heavy Actuators, Compressor if you use it)

Re: pic: Team 548 Teaser (What could this be?)
 

Two answers:

1. Doesn't matter. They'll never get all those servos synchronized anyway!

2. It's rotating something heavy. How about a rotating shooter?

Re: pic: Team 548 Teaser (What could this be?)
 

I'll go out on a limb and say it's for rotating one (or maybe all three?) swerve modules. But that doesn't make sense, so i agree that it rotates a shooter.

Re: pic: Team 548 Teaser (What could this be?)
 

It looks like a Spirograph. I expect nobody knows what that is anymore:(