Chief Delphi - pic: almost there

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)

- - pic: almost there (http://www.chiefdelphi.com/forums/showthread.php?t=73781)

Stillen

07-02-2009 13:18

Re: pic: almost there

guys see my next picture for the solution....i'm posting it now

Greg Needel

07-02-2009 13:18

Re: pic: almost there

ok, let me break this down easily.

Each corner must have 6 inches on either side of it

And

Your robot must have bumpers covering 2/3 of the robot.

and

the bumpers must be supported along the whole length of the wood

See the attached image for a possible fix for your frame.

Stillen

07-02-2009 13:34

Re: pic: almost there

THANK you for the visual aide. I appreciate the assistance .... I tried to post an updated pic in this thread but i couldnt figure out how. I ended up posting another pic in a different thread... sorry

Stillen

07-02-2009 15:12

Re: pic: almost there

Look at figure 8-2, upper left corner and it shows a bumper overhang with no backer.

Stillen

07-02-2009 15:15

Re: pic: almost there

Quote:

Originally Posted by chiquita77 (Post 815913)

What exactly is the height of your robot. Im just curios as to if there is going to be anything on top

Currently 54" with the shooter on the turrent mounted. We may add a roller at the top but we would still be under the 60" mark.

EricH

07-02-2009 15:19

Re: pic: almost there

Quote:

Originally Posted by Stillen (Post 816047)

Look at figure 8-2, upper left corner and it shows a bumper overhang with no backer.

And the overhang isn't counted in the bumper length.

All times are GMT -5. The time now is 17:32.

Page 2 of 2

Show 100 post(s) from this thread on one page