Chief Delphi - Bumper Limits??

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- General Forum (http://www.chiefdelphi.com/forums/forumdisplay.php?f=16)

- - Bumper Limits?? (http://www.chiefdelphi.com/forums/showthread.php?t=73873)

saverave

07-02-2009 19:31

Bumper Limits??

Besides the bumper depth and width limits, is there a limit as to how far off of the ground the robot's bumpers must be (besides the well known fact that they cannot TOUCH the ground b/c they could be considered as being used to increase traction)? I looked in the manual and did not find anything, but that doesn't mean I didn't overlook it...

GaryVoshol

07-02-2009 19:34

Re: Bumper Limits??

Yes, you did overlook it. Check <R08> P, and the definition of BUMPER ZONE.

AlexD744

08-02-2009 22:16

Re: Bumper Limits??

They have to be between 1 and 7 inches off the ground. We made the same mistake but fixed it the next day.

All times are GMT -5. The time now is 04:30.