pic: Chief Delphi - 2009 Teaser 2
 

Re: pic: Chief Delphi - 2009 Teaser 2
 

shooter robot i presume =]

Re: pic: Chief Delphi - 2009 Teaser 2
 

Now that's a better teaser. Looking like shooter to me.

Re: pic: Chief Delphi - 2009 Teaser 2
 

Does anyone have any "pro" tips on how to properly size/attach ends together of polycord similar to the kind that Chief appears to be using?

Re: pic: Chief Delphi - 2009 Teaser 2
 

this looks alot like ours.....have you bee spying on us?:)

Re: pic: Chief Delphi - 2009 Teaser 2
 

Oh man, Seraphim, our team loves your slogan... Many times we will run around the shop yelling "HOW BOUT THEM RED TAILS!!", also, no we havent xD

And about the polycord, we use a fixture made by one of our mentors.

Re: pic: Chief Delphi - 2009 Teaser 2
 

Ha. We are using the exact same turntable bearing. I assume you are doing a shooter with a power-fed elevator to it.

Re: pic: Chief Delphi - 2009 Teaser 2
 

hopefully we can team up again in troy so we all can say it

Re: pic: Chief Delphi - 2009 Teaser 2
 

We use a fixture to align the ends and press them together when they are ready. We get them ready by using a heat gun to bring then to critical temp without melting them.

The joint is as strong and clean as the orig poly cord. As an added support we also use shrink wrap on the joint.... works good.

McMaster Carr sells a fixture for $450.00.... way to $$$ for us so we made our own.

Remember OPEN FLAMES are NOT allowed at the events as that poses a safety concern.

Re: pic: Chief Delphi - 2009 Teaser 2
 

i hope that system works for you guys it looks good