Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Yeah!! We finally finished making Orbit Balls!! (http://www.chiefdelphi.com/forums/showthread.php?t=73884)

KevinReid 08-02-2009 22:10

Re: pic: Yeah!! We finally finished making Orbit Balls!!
 
Try the Six Million Dollar Man... Classic

http://en.wikipedia.org/wiki/The_Six_Million_Dollar_Man

Joe Ross 09-02-2009 14:40

Re: pic: Yeah!! We finally finished making Orbit Balls!!
 
Quote:

Originally Posted by OScubed (Post 816496)
Ours will probably be more robust than the real ones. The real ones use a cheap plastic connector that is easily broken. These are pop-riveted together for each strip. Not to say they won't break - just that they're pretty tough. We're actually concerned that these will be more robust than the real balls which is why we're not replacing the few real ones we got so that we can use those for our official "testing".

After making our balls, we wanted to do some testing with broken bands. It took many throws as hard as people could into a concrete floor to get both pop rivets to come out. The Lexan never broke. The same type of throwing quickly broke a real ball. In retrospect, it would have been easier to drill out the rivets, but throwing them was more fun.

David Brinza 09-02-2009 14:45

Re: pic: Yeah!! We finally finished making Orbit Balls!!
 
Quote:

Originally Posted by Joe Ross (Post 817324)
After making our balls, we wanted to do some testing with broken bands. It took many throws as hard as people could into a concrete floor to get both pop rivets to come out. The Lexan never broke. The same type of throwing quickly broke a real ball. In retrospect, it would have been easier to drill out the rivets, but throwing them was more fun.

We did similar testing of our adhesive-bonded practice balls - no failures at all.

We also used hot glue to join the fabric ends. It's faster and easier than sewing and also is quite robust (no separated seams after an impromptu soccer game).

Robert103 10-02-2009 16:18

Re: pic: Yeah!! We finally finished making Orbit Balls!!
 
We found that balls pop riveted/glued together acted differently than the store bought balls, do the balls you made still flex like they do?

Josh Goodman 10-02-2009 17:18

Re: pic: Yeah!! We finally finished making Orbit Balls!!
 
Quote:

Originally Posted by Robert103 (Post 818040)
We found that balls pop riveted/glued together acted differently than the store bought balls, do the balls you made still flex like they do?

Slightly different. Yes, we thought of this too. They are a little stiffer than the store-bought kind but they flex enough so that there won't be any problems.

Lara Surmak 13-03-2009 19:44

Re: pic: Yeah!! We finally finished making Orbit Balls!!
 
What did you make the balls out of?
We tried using lexan that was the same thickness as the plastic that the original moon rock was made from, but the ball that was made is unsquishable, and therefore useless to our team.

kevin.li.rit 13-03-2009 20:01

Re: pic: Yeah!! We finally finished making Orbit Balls!!
 
Quote:

Originally Posted by Lara Surmak (Post 835577)
What did you make the balls out of?
We tried using lexan that was the same thickness as the plastic that the original moon rock was made from, but the ball that was made is unsquishable, and therefore useless to our team.

They used polycarbonate(lexan). I'm not sure of the thickness.

Cynette 14-03-2009 13:59

Re: pic: Yeah!! We finally finished making Orbit Balls!!
 
Our balls were substantially stiffer than the factory manufactured ones, but were still usable by most teams for testing and practice. One suggestion to make them more flexible is to use tape to connect the ends rather than the rivets.

artdutra04 14-03-2009 16:22

Re: pic: Yeah!! We finally finished making Orbit Balls!!
 
Quote:

Originally Posted by Cynette (Post 835806)
Our balls were substantially stiffer than the factory manufactured ones, but were still usable by most teams for testing and practice. One suggestion to make them more flexible is to use tape to connect the ends rather than the rivets.

I wish I had known about this back when we wrote the white paper, but the material inside a real Orbit Ball is polypropylene. McMaster sells 4'x8' sheets of 1/16" thick polypropylene for $29.16 and 3/32" thick sheets for $41.20.

Cynette 14-03-2009 18:33

Re: pic: Yeah!! We finally finished making Orbit Balls!!
 
Quote:

Originally Posted by artdutra04 (Post 835836)
I wish I had known about this back when we wrote the white paper, but the material inside a real Orbit Ball is polypropylene. McMaster sells 4'x8' sheets of 1/16" thick polypropylene for $29.16 and 3/32" thick sheets for $41.20.

And that is cheaper than Lexan, for sure! But same thing for us, by the time we knew what the material was, we had already purchased and cut the lexan.

But we love our slightly stiffer and WAY more durable balls! And so did the teams that came to our rally because there were lots and lots of them.


All times are GMT -5. The time now is 23:33.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi