Chief Delphi - Static warning!!!

Page 2 of 2

Show 100 post(s) from this thread on one page

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Technical Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=22)

- - Static warning!!! (http://www.chiefdelphi.com/forums/showthread.php?t=73943)

Team 135

10-02-2009 13:54

Re: Static warning!!!

As I said this is for testing only for us. The rule says that the only contact with the floor must be with the wheels provided in the kit.

Alan Anderson

10-02-2009 13:59

Re: Static warning!!!

Quote:

Originally Posted by Team 135 (Post 817962)

As I said this is for testing only for us. The rule says that the only contact with the floor must be with the wheels provided in the kit.

Again I ask: what rule? So far as I can tell, neither the manual nor the GDC's Q&A responses make a static drain wire illegal.

Russ Beavis

10-02-2009 13:59

Re: Static warning!!!

Actually, that's not what the rule says. You'll be safe if you use this simplification but it's not technically accurate.

Russ

johnr

11-02-2009 11:07

Re: Static warning!!!

Does this rework thing solve the problem or should teams still take other precautions?

Russ Beavis

11-02-2009 11:13

Re: Static warning!!!

Should solve the problem but other precautions wouldn't hurt. It's always good practice to ground yourself before working with/around electronics.

Russ

dpeterson3

11-02-2009 22:56

Re: Static warning!!!

Thank you. I need to show this one to the rest of the team. It took me a day to convince the team to mount the CRIO on non-static materian (wood). They didn't believe the frame would carry a charge.

Alan Anderson

12-02-2009 10:22

Re: Static warning!!!

Quote:

Originally Posted by dpeterson3 (Post 819033)

It took me a day to convince the team to mount the CRIO on non-static materian (wood).

<R41> should have convinced them in a matter of seconds.

All times are GMT -5. The time now is 02:48.

Page 2 of 2

Show 100 post(s) from this thread on one page