Chief Delphi - Servos not moving

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Servos not moving (http://www.chiefdelphi.com/forums/showthread.php?t=74022)

Marlfox

09-02-2009 18:16

Servos not moving

Our servos are not responding at all, but they do give values in Labview and the motors will run, but our servos do nothing. We have replaced the servos and are using example code. Please help us!!!!

AdamHeard

09-02-2009 18:21

Re: Servos not moving

Quote:

Originally Posted by Marlfox (Post 817453)

Our servos are not responding at all, but they do give values in Labview and the motors will run, but our servos do nothing. We have replaced the servos and are using example code. Please help us!!!!

I believe there is a jumper that mus be done on the digital sidecar per each pwm channel if you are using servoss. This provides the additional current servo's require.

Marlfox

09-02-2009 18:24

Re: Servos not moving

thanks guy in the computer

All times are GMT -5. The time now is 10:45.