Chief Delphi - Driver Station Digital Outputs

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Programming (http://www.chiefdelphi.com/forums/forumdisplay.php?f=51)

- - Driver Station Digital Outputs (http://www.chiefdelphi.com/forums/showthread.php?t=74061)

Driver Station Digital Outputs

Anyone know how much current the DS outputs can sink or source??

tom lafleur
mentor team 812

Re: Driver Station Digital Outputs

See section 3.1.6.2 of the control system manual.

Re: Driver Station Digital Outputs

See http://www.usfirst.org/frccontrolsystem and Chapter 3 Component Data Sheets of the Control System Manual.

Quote:

Originally Posted by 3.1.6.2 Driver Station Digital Outputs:

The DS digital output pins are driven directly by 5V transceiver (SN74LVC4245A device). Be sure to use caution as each pin can source/sink more than 40mA. It is possible to damage the device if too much current is driven on a single pin or the total current supplied by the device on all pins is excessive. Best practice should be to use a limiting resistor to prevent external loads from drawing excessive current, especially for LEDs, be sure to use a series resistor to limit the current.