Chief Delphi - No pneumatics work help

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Pneumatics (http://www.chiefdelphi.com/forums/forumdisplay.php?f=54)

- - No pneumatics work help (http://www.chiefdelphi.com/forums/showthread.php?t=74182)

nevereverregret

11-02-2009 18:34

No pneumatics work help

We have last years solinod valves hooked up and they work manualy but when wired and connected to the program they wont move but retract when the system is pressureized. The lights go on on both the solinod and the breaker....

PLEASE HELP WITH WIREING!!!!!:confused: :confused: :confused: THANK YOU SOOOO MUCH

Pumagrif

11-02-2009 18:42

Re: No pneumatics work help

Quote:

Originally Posted by nevereverregret (Post 818822)

Make sure the Solinod break out is wired correctly to the solinod valve. If that doesnt help double check your connections and still nothing contact me ill help as much as I can

nevereverregret

11-02-2009 20:14

Re: No pneumatics work help

Quote:

Originally Posted by Pumagrif (Post 818826)

Make sure the Solinod break out is wired correctly to the solinod valve. If that doesnt help double check your connections and still nothing contact me ill help as much as I can

How would you wire it exactly???? lol thanks for the help!!!

Pumagrif

12-02-2009 08:14

Re: No pneumatics work help

Quote:

Originally Posted by nevereverregret (Post 818915)

How would you wire it exactly???? lol thanks for the help!!!

On the smc valve where the wire pins are there is a polarity indication on the side show positive or negative. You will hook those pins to wires which need to be plugged in to another set of pins on the solenoid break out on the cRIO. If you like somr pictures of what I'm talking about let me know.

All times are GMT -5. The time now is 16:40.