CRio Not Responding
 

Ok here is what is happening. Our CRio was responsive but now we can not get any code running. The battery voltage on the DS comes up as 00.00. I have no idea what happened. It is only a few days until shipment please help me!

Re: CRio Not Responding
 

What happens when you try to deploy code to the cRIO by running a VI?

Re: CRio Not Responding
 

It loads but nothing happens.

Re: CRio Not Responding
 

If you just push the run button on your robotMain, what happens?

Greg McKaskle

Re: CRio Not Responding
 

The code deploys and our robot will not move all the lights blink and the voltage on the driver station says 00.00.

Re: CRio Not Responding
 

We had this happen to us after labview crashed while uploading code. Reimage the cRio then reload your code. Thats what fixed it for us

Re: CRio Not Responding
 

My suspicion is that you have a version problem between the cRIO and the WPI library.

If you launch the dashboard it will show errors occurring on the cRIO. I think it is -44085 that indicates a version problem. If this is your problem, reimage the cRIO to v11, and be sure to push the checkbox to reformat.

Greg McKaskle

Re: CRio Not Responding
 

We re-imaged it twice and nothing worked.