Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Extra Discussion (http://www.chiefdelphi.com/forums/forumdisplay.php?f=68)
-   -   pic: Team 604 Electronics Board 2009 (http://www.chiefdelphi.com/forums/showthread.php?t=74404)

Eugene Fang 13-02-2009 23:23
pic: Team 604 Electronics Board 2009
 

Gary.C 13-02-2009 23:24
Re: pic: Team 604 Electronics Board 2009
 
Very nice and clean. I like it.

MPG 13-02-2009 23:29
Re: pic: Team 604 Electronics Board 2009
 
It does look nice but if you have a problem with the four jags on the bottem they are going to be a pain to get at and fix/replace

CDH Jeff 14-02-2009 03:45
Re: pic: Team 604 Electronics Board 2009
 
also, did you guys remember to keep the 1/2" clearance between the top of those bottom jags and the bottoms of the jags on top? if not have you guys had any problems with the temp of your jaguars?

Eugene Fang 14-02-2009 05:23
Re: pic: Team 604 Electronics Board 2009
 
Quote:
Originally Posted by CDH Jeff (Post 820446)
also, did you guys remember to keep the 1/2" clearance between the top of those bottom jags and the bottoms of the jags on top? if not have you guys had any problems with the temp of your jaguars?


It's kind of hard to tell in this picture, but there is clearance

Gabe 15-02-2009 07:39
Re: pic: Team 604 Electronics Board 2009
 
I do like how clean everything is. Are you sure that the battery will stay put or are you going to put velcro between the battery bottom and the board? Just a suggestion.:)

ATannahill 15-02-2009 08:18
Re: pic: Team 604 Electronics Board 2009
 
Where is your on/off switch?

whlspacedude 15-02-2009 08:30
Re: pic: Team 604 Electronics Board 2009
 
It appears to be behind the Battery.

Eugene Fang 18-11-2009 14:41
Re: pic: Team 604 Electronics Board 2009
 
Quote:
Originally Posted by Gabe (Post 821150)
I do like how clean everything is. Are you sure that the battery will stay put or are you going to put velcro between the battery bottom and the board? Just a suggestion.:)
The battery was secured with a wide Velcro strap that wrapped around the bottom of the board and up around the battery.


All times are GMT -5. The time now is 17:00.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi