Chief Delphi - Driver Station ESD Sensitivity Rework

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Rules/Strategy (http://www.chiefdelphi.com/forums/forumdisplay.php?f=6)

- - Driver Station ESD Sensitivity Rework (http://www.chiefdelphi.com/forums/showthread.php?t=74465)

furiousgeorge

14-02-2009 14:53

Driver Station ESD Sensitivity Rework

are we required to perform the driver station esd sensitivity rework?

MikeDubreuil

14-02-2009 15:02

Re: Driver Station ESD Sensitivity Rework

YES.

Quote:

Originally Posted by <R85.1>

All Driver Stations must have their circuit board grounded to the metal case. The document
that describes the process for grounding the Driver Station is posted under Section 8 - The Robot of the Competition Manual at
http://www.usfirst.org/community/frc/content.aspx?id=452

dlavery

14-02-2009 23:48

Re: Driver Station ESD Sensitivity Rework

Count on the inspectors checking to see that the ESD correction has been installed when you go through inspection at the competitions. It is one of the items on revision C of the Inspector's Checklist.

-dave

All times are GMT -5. The time now is 00:22.