Chief Delphi

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)
-   Sensors (http://www.chiefdelphi.com/forums/forumdisplay.php?f=173)
-   -   Filters (http://www.chiefdelphi.com/forums/showthread.php?t=74670)

PWHSrobotics 16-02-2009 13:34

Filters
 
Plugged in the gyros and accelerometers and they are jumpy. A while back one of our mentors said we were going to have to use filters on these readings, and I see through LabView there are build in filter vi's.

Are any other teams using filters for their Gyro's and Accelerometers, and if so which ones are you using?

PWHSrobotics 17-02-2009 18:34

Re: Filters
 
anyone? :)

brianc217 28-02-2009 11:58

Re: Filters
 
i would use them but i didn't even know labview had them. where are they?

Ridley444 28-02-2009 15:45

Re: Filters
 
If you are using LabVIEW then there is a very simple solution for filters. You can use a while loop and some shift registers along with the compound arithmetic vi for a quick and dirty fix for filters. Just make sure that the shift registers are initialized to zero.

Otherwise you can use arrays and replace with array subset Vi's for a more snazzy way of averaging.

EricVanWyk 28-02-2009 15:48

Re: Filters
 
Or you can use the included filters. Be sure to use the Pt by Pt ones - the "normal" ones are meant to take a chunk of time at once, the Pt by Pt are meant to be used as things happen.

I encouraged my students to use a few lowpass filters, but I don't think they bit.


All times are GMT -5. The time now is 08:01.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi