What's going in your Withholding Allowance?
 

(I'm hoping this is the correct forum. Please move if necessary.)

I've got engineers here who each want to fill the 40 pounds of withholding allowance with their gear. Each one has valid reasons for their suggestions. So, I'm wondering what are other teams holding out?

Thanks,

Trying to Help
Team 1729

Re: What's going in your Withholding Allowance?
 

We are withholding:
the basket from our manipulator
the electronics board
4 wheels (for the spare chassis)
2 reference wheels and their encoders
the camera and its mount

basically the manipulator group that had the most issues, and the control system for the autonomous testing.

Re: What's going in your Withholding Allowance?
 

control system (DS + cRio + power board)

a TON of unneded spare parts

lots of little peices of scrap metal, we're underweight and plan to add the extra weight at competition.

possible new version of about half our manipulation system

grr.

-Z

Re: What's going in your Withholding Allowance?
 

actually nothing that goes on the robot:D


but we are planning on making a spare Spinning Tube of Death to test with(the motor gets overloaded sometimes when we have alot of balls in their) shorter tubing

Re: What's going in your Withholding Allowance?
 

Just a few sensors and some metal braces that still need some finishing. And the driver station. Maybe 10 pounds at most.

We will be bringing probably 50 pounds of raw materials, and maybe 175 pounds of various fasteners (standard hardware) to share with other teams. But that's all COTS stuff and isn't part of our 40 pounds.

Re: What's going in your Withholding Allowance?
 

-A piece of body paneling that isn't finished.
-The Camera (we plan to obtain another cRIO with which to tweak programming)
-Some odds and ends that may or may not ever touch the 'bot.

Re: What's going in your Withholding Allowance?
 

Our whole robot is 38.2 pounds, so we decided to just leave it and cut costs on shipping.





Just kidding...Electro board and camera are left, will ad some more stuff to those 40 pounds...

Re: What's going in your Withholding Allowance?
 

Whole shooter tower and turret, all 30 pounds of it.

We are going to mount it on our test chassis and use it to continue software development.

Re: What's going in your Withholding Allowance?
 

Ours will pretty much be spare motors, parts, and raw material.

Re: What's going in your Withholding Allowance?
 

School and team name and sponsor stickers....

I think the rest of the stuff we're bringing is COTS, although we might bring the prototype wood chassis if we have room? it's only 18 lbs, and it's slightly entertaining

Re: What's going in your Withholding Allowance?
 

custom carbon fiber robot, eh? ;) maybe Styrofoam robot? :P
oh wait i know: blimp robot!

Re: What's going in your Withholding Allowance?
 

For 1618:

-School/sponsor logos
-Vinyl to complete the team's blackout look--imagine how they wrap cars, and apply to a robot.
-Spare 545 motors with the BaneBots pinion pressed on

I'm not sure what exactly 2815 will be bringing.

Re: What's going in your Withholding Allowance?
 

We removed our turret with shooter and the electronics to run it (our small electronics board +1 Jag from the side wall of the 'bot)

Not sure what the final weight on these parts was, but it should be well under 40 lbs.

We may be adding upgrade parts for the first conveyor (deeper Gates belts to prevent slipping) and the intake roller (investigating ways to make it faster).

Re: What's going in your Withholding Allowance?
 

If timing belts are slipping, they need a lot more tension; making them wider only increases the force you can transfer through them.

Re: What's going in your Withholding Allowance?
 

The belt that is on there is tight as a drum. It was tensioned into place by moving one of the parts with a clamp and does not appear to flex at all when pushed on. It is not one of the 5mm kit belts, it has a much shallower profile. We are looking at belts with a deeper profile, not wider belts.

We have a nearly identical 2nd conveyor running perfectly using some fo the 5mm kit belts.