Chief Delphi - Automation Direct Push Button

Chief Delphi (http://www.chiefdelphi.com/forums/index.php)

- Electrical (http://www.chiefdelphi.com/forums/forumdisplay.php?f=53)

- - Automation Direct Push Button (http://www.chiefdelphi.com/forums/showthread.php?t=74993)

MPG	19-02-2009 17:56

Automation Direct Push Button

I was wondering if you could wire the provided Automation Direct push button to the driver station digital I/O and if you can how would I go about wiring it?

Alan Anderson

19-02-2009 19:14

Re: Automation Direct Push Button

Any SPST switch will work on a Driver Station Digital Input. Connect the switch between Ground and Signal. Also connect a 10k resistor between Signal and +5V. You'll read 1 when the switch is open, and 0 when the switch is closed.

MPG	19-02-2009 22:56

Re: Automation Direct Push Button

Thank you
That should help me alot

All times are GMT -5. The time now is 12:34.