![]() |
Top Ten Tips From The Veterans
Jessica of Team 3044 asked the 15 most experienced teams at the 2009 Finger Lakes Regional, “What is the most useful advice you have for a rookie team?”
And They Answered...
Hope this helps... |
Re: Top Ten Tips From The Veterans
ive got another... know the rules. people like you a lot better that way:)
|
Re: Top Ten Tips From The Veterans
Testing the students [especially drive team] on the field rules helps in the long run especially in a game such as Lunacy where i'm pretty sure all of the penalties [@ buckeye] were caused by human players.
Also, something our team does is give a general robot test that allows anyone who doesn't know something about a piece of the robot know what it is and what it does. |
Re: Top Ten Tips From The Veterans
Avoid repeating boneheaded mistakes. :D
|
Re: Top Ten Tips From The Veterans
Never give up, never surrender! Matches are and will be decided after the buzzer has sounded.
Check everything twice. Murphy is alive and well. |
Re: Top Ten Tips From The Veterans
Don't stress
|
Re: Top Ten Tips From The Veterans
-Don't complain that you lost that match, think about what, under your control, you can improve.
-If you can improve something, make sure you have enough time to do it 2-3 times. -Things can go wrong on the practice field. -Sometimes I feel like I stick my neck out there when I say this, but- The mentors, coaches, and teachers aren't always right. And it is mainly the ones who say that it's not true that it applies to. -One of the biggest things I've learned is that you have to learn. |
Re: Top Ten Tips From The Veterans
ZIP TIE THE BATTERY CONNECTOR TOGETHER!!
If your robot gets hit hard enough that red connector for the main battery may disconnect. It has happened. one zip tie/ tie strap/etc or no power for a match. |
Re: Top Ten Tips From The Veterans
have a check list in the pit, so that after a match you can do a complete physical of the robot.
this has saved our team more than once, like a setscrew that had fallen out, and if we hadn't checked it, we would have put the robot on the field and the main function would not have worked. |
Re: Top Ten Tips From The Veterans
Quote:
![]() http://www.youtube.com/watch?v=h7gNFvu1EYA |
Re: Top Ten Tips From The Veterans
never let anyone tell you that you cant do it...nothing is impossible and with hard work and determination you can do anything.
|
Re: Top Ten Tips From The Veterans
Don't waste your practice matches. Get your robot up and running as soon as possible. The more experience you have the better.
|
Re: Top Ten Tips From The Veterans
don't forget to scout
have one (1) person take care of the batteries, with a system everyone understands check the robot after every match thank your mentors, volunteers and parents don't forget your GP always leave with a positive experience |
Re: Top Ten Tips From The Veterans
The three things I try to encourage rookie teams to do are:
1) Buy a scale!! 2) Pick a common fastener and stick to it unless there is a really good reason not to in a particular place. My personal preference is 1/4-20 socket head cap screws, but whatever you pick is fine. Then buy them in 1/4" length increments from 1/2" to about 2-1/2", along with the correct nuts and washers. Then buy about a dozen of the correct wrenches for whatever size you picked. And hide all the other sizes in the toolbox. It's nice to be able to give everyone on the pit / drive teams their own wrench, and they have the tool in their pocket to fix almost anything. 3) Buy a scale!! Spend $150-$200 on a good 200# capacity digital scale. And then make sure you use it. It's a lot easier to take weight off a part before you install it the first time than to take the robot apart later to drill holes in something. |
Re: Top Ten Tips From The Veterans
Put as much effort into sustaining your program as you do your robot. The last thing you want to do if figure out how your going to pay for things, when your too busy trying to build the best robot you can build.
|
| All times are GMT -5. The time now is 06:07. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © Chief Delphi